Package includes seat covers, preassembled door panels and or rear panels. Windlace set, Napped cloth headliner and matching sunvisors. Post boards, Matching interior Vinyl covered kick panels and extra vinyl. Daytona carpet set and floor mat set. 65 lbs.

Includes 210 cloth Seat Covers, preassembled 4 door panels and rear Dogleg panels. Windlace set with center post cardboards attached, Napped cotton headliner and matching sunvisors. Matching interior Vinyl covered kick panels and extra vinyl. Daytona carpet set and floor mat set. 70 lbs.

Exact duplicate of the 210 seat covers using our reproduced Chain Link seat cloth in all three colors of Blue, Green and Brown. You can choose your choice of the original Gaberdine cloth or 1955 interior vinyls in the correct colors for seat covers. All installation listings attached. Seat shell vinyl included. Samples sent upon request. 16 lbs.

Front seat cover using our reproduced Chain Link seat cloth in all three colors or Blue, Green and Brown. You can choose your choice of the original Gaberdine cloth or 1955 vinyls in the correct colors for seat trim. All installation listings attached. Seat shell vinyl included. 10 lbs.

This universal kit is high density two layered foam in the size and shapes to repad each seat. This is the same foam we have used and tested when we install our seat covers. We feel it is better than molded foam. Sold per seat, cushion and backrest. Oversize shipping.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Replace your rusty, unusable front seat backrest springs with this new reproductions in the correct shape. Sold in right or left assemblies. Please state which side when ordering, or both. Easy to install. 10 lbs.

These mounting brackets are used on 2 door, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

Chain pattern 210 seat cloth in all three or the original colors of Blue, Brown and Green. Beautiful reproduction 63 inches wide. Sold per yard, 2 lbs per yard.

Plain 1955 original Haircel grain vinyl in all the correct colors. This was used on the seats if desired and door panels. Heavy weight non-expanded. 54" wide. Priced $39.00 per yard. 3 lbs per yard.

This is the wavy line embossed 1955 210 door panel vinyl. Available in all 3 original colors of Green, Brown and Blue. 54" wide. Only used on 1955 210 doors. $59.95 per yard. 3 lbs per yard.

New front and rear door panels and trim panels. Die cut waterproof boards with new galvanized door edge metal bands. Covered in our exclusive Herringbone vinyl and heavy weight plain vinyl in the correct locations. In all three of the factory original colors. Vinyl covered kick panels, Extra armrest vinyl, and Cloth covered windlace set with cardboard supports. 40 lbs.

New front and rear door panels and trim panels. Die cut waterproof boards with new galvanized door edge metal bands. Covered in our exclusive Herringbone vinyl and heavy weight plain vinyl in the correct locations. In all three of the factory original colors. Vinyl covered kick panels, Extra armrest vinyl, and Cloth covered windlace set with cardboard supports. 25 lbs.

This 4 piece set of the curved and straight interior moldings are an exact reproduction and easy to install. If you purchase our door panels, we will install these free with purchase. 

These front door panel boards are presicion die cut for the front doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots.  10 lbs.

Made to go from the front edge of the quarter post to the wheelwells. Die cut waterproof boards with punch outs for window cranks and armrests. Sold in pairs. 10 lbs.

This is for the front doors and front edge of the 2 door rear quarter panel boards. Set of 8 pieces. Galvanized metal with serrated inner edges to hold the trim vinyl tight. Nails included.  Purchase the 4 door set for $160.00    4lbs per 2 door set.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

Rear quarter side panel boards. With holes pre-punched for stainless trim and armrest mounting holes. $39.95 pair. 5 lbs.

Rear quarter side panel boards, attach behind the rear door next to the rear seat back rest. 2 lbs.

Waterproof die cut center post cardboards, sold per pair. 1 pound

These are a pair of waterproof die cut boards that install behind the side windows. You cover them in headliner material.

Waterproof die cut center pillar cardboards (2). Attaches with post clips, listed on this page. 14 clips required.  5 lbs.

New Armrest Assembly (2) for the 1955 210 Models. Complete plastic bases with stainless trim strip. New rubber pads and vinyl covering. Price for  pair.  2 lbs.

2 needed for 2 door Sedans and 14 needed for the 4 door Sedans. Sold individually. 1/2 lb.

These strips attach to the inner roof sides for stapling the headliner and windlace correctly. Black precut strips made for each specific model. Please specify 2 door or 4 door Sedan. 2 lbs.

7 metal headliner installation bows, curved to the proper contours for each specific model. 10 lbs.

Brushed cotton cloth (Also know as napped cloth) cut and sewn into correct fitting headliners. With all bow listings sewn in the proper sections. In original colors or many other colors available. We can aslo use perforated or patterned vinyl headlining material in many colors. Extra sunvisor cloth included. 8 lbs.

 Installation Video -http://ciadellainteriors.blogspot.com/2011/10/ciadella-headliner.html

Hand made using the same Napped cloth or matching headlining material you choose. Matching edge binding and chrome tips. price for pair 5 lbs.

This is Black textured panel board die cut to properly fit the rear shelf behind the rear seat back and rear window.  6 lbs.

These are die cut boards to properly fit the rear package shelf in front of the rear window. We professionally vinyl cover these panels in the proper interior color for each model.

Crushed Ice textured black rubber front and rear floor covering. Molded to the floor contour, shape and size. 28 lbs.

Duplicated from original low loop 1955 carpet material. Cut and Sewn just like the factory did. Matching interior vinyl heel pad and edge binding. Foam underside and jute padding added.  20 lbs.

A set of 4 replacement loop carpet mats with nubbed non slip backing  10 lbs.

FREE with interior purchase. 

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set. 20 lbs.

This trunk mat is made using our low loop "Daytona" carpet material that has latex foam backing. Cut to properly fit the trunk floor contour and shape, with or without spare tire cut out opening. Matching interior vinyl edge binding sewn on the outside edges to duplicate the interior floor carpet. 9 lbs.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

 Black Rubber Trunk mat. Molded to the shape of your 1955 trunk floor, with lines and cut out for spare tire. 16 lbs.

We cut and completely vinyl bound on the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.