Exact vinyl seat covers as original, preassembled door and rear side panels. Vinyl headliner and matching sunvisors, windlace set and center pillar post boards, wheelwell covers, Vinyl covered kick panels and above the wheelwell boards. Extra vinyl. Daytona carpet set and floor mats. 60 lbs.

Exact vinyl seat covers as original, preassembled 4 door panels and Dogleg panels.Vinyl headliner and matching sunvisors, windlace set with center pillar post cardboards attached and tailgate windlace, sewn wheelwell covers, Vinyl covered kick panels and above the wheelwell boards. Extra vinyl. Daytona carpet set and floor mats. 60 lbs.

Made exactly as they were originally in the two tone all vinyl interiors. Correct embossed Ribbed Fake stitch pattern on heavy weight haircell grain vinyl on the seat inserts. All installation listings sewn in the proper factory locations. In all three factory colors or special colors of your choice. Seat shell vinyl included. 24 lbs.

This 1 inch fake-stitched vinyl. In the three correct colors or any color of vinyl you choose. This was used on the seats and door panels. Heavy weight non-expanded 54" wide that has foam padded bottom. Priced per yard. 5 lbs per yard.

This kit is high density layered foam in the size and shape to repad each seat. For 2 door and 4 Doors, for front and rear seats. This is the same foam we have used and tested when we install our seat covers.  We feel it is better than molded foam. Sold per seat, cushion and backrest. 24 lbs.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

Replace your rusty, unusable front seat backrest springs with this new reproductions in the correct shape. Sold in right or left assemblies. Please state which side or both when ordering.  Easy to install. 10 lbs.

These mounting brackets are used on 2 door, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

New waterproof die cut boards for front and rear panels surrounded with galvanized edge metal bands with nails attached. Fake stitched vinyl as used on the seat covers, and plain vinyl. Also included are vinyl covered kick panels, 2 door windlace set or 4 door windlace set gets center post boards with cloth windlace attached. Tailgate windlace, wheelwell covers and vinyl covered boards for above the wheelwells. Extra vinyl. In all of the three original colors, just like the originals. 30 lbs.

This 4 piece set of the curved and straight interior moldings are an exact reproduction and easy to install. If you purchase our door panels, we will install these free with purchase. 5 lbs.

These front door panel boards are presicion die cut for the front doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. Sold in pairs @ $49.95  per pair 10 lbs per 2 door boards.

Made to go from the front edge of the quarter post to the wheelwells. Die cut waterproof boards with punch outs for window cranks and armrests. Sold in pairs. 10 lbs.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the SW door panels. Nails included. Sold in pairs or purchase the 4 door set for $160.00  4 lbs per set.

For all years and models. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. price per pair. 3 lbs.

New Armrest Assembly for the 1955 210 Models. Complete plastic bases with stainless trim strip. New rubber pads and vinyl covering. Price for pair 2 lbs.

Waterproof die cut pillar post cardboards, sold per pair.  1 pound.

These are a precut set for each specific model. These attach to the interior body of the Station Wagon and the headliner and windlaces staple to them. 2 lbs. File Photo.

Waterproof die cut cardboards. Attaches with clips listed below to the metal center post. 14 clips required. 5 lbs.

2 needed for 2 door Sedans and 14 needed for the 4 door Sedans. Sold individually.  0.5 lbs for 14 clips.

Headliner sewn for this station wagon roof using matching Beige or Green vinyl as they came originally. Extra pillar post and sunvisor vinyl included. Or choose another material. $179.00 10 lbs.

Hand made using new boards and metal mounting rods. Vinyl or matching headlining material you choose. Matching edge binding and chrome tips. price for pair 5 lbs.

Cloth covered 1/2" round sponge rod with vinyl dash flaps and kick panel slide in cords.Extra windlace for tailgate.  5 lbs.

Woven cloth covered 1/2" sponge rod with kick panel slide in cord and vinyl dash flaps. The 4 door set is sewn to center post boards (as picture). 10 lbs.

Cloth covered windlace in many colors is $7.50 per yard, call

This is a pair of center post pull straps that are cloth covered to match the windlace in many colors. Sold in pairs, also available in vinyl. 1 lb.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

These are a pair of heavy die cut waterproof boards that attach above the rear wheelwells on all Station Wagon models. Correct exact reproduction. 4 lbs.

Sewn to the proper shape using 1955 interior vinyl. Double needle stitched. In the correct 210 wheelwell colors or a color of your choice. price per pair 5 lbs.

Crushed Ice grain black rubber front and rear floor covering. Molded to the floor contour, shape and size. 28 lbs.

Textured grain black rubber rear floor covering for under the rear seat. Contour Molded. 12 lbs.

This is our reproduction tight weave carpet cut and sewn the same way the factory did them. All edge binding and heel pad match. Jute padded underside. Let us know if you have Bucket seats and we will provide a one piece molded carpet set. Available in many colors. 20 lbs.

Low loop weave reproduced to duplicate the original. Cut and Sewn with latex foam and jute padded underside. Edge binding and heel pad use interior trim vinyl in the correct 1955 colors. 20 lbs.

Precision cut plywood for cargo area and spare tire cover. Cut outs for shock cover plates. Replace you old rotted warped boards with new. 20 lbs.

This is a die cut cargo area replacement loop carpet kit to match the floor carpet set. This 5 piece seat includes backs of rear seats, cargo area floor, spare tire lid and tailgate. 20 lbs.

Die cut to fit from the back seat panels, cargo area and the tail gate. With or without spare tire panel cut out. Replacement loop carpet kit is $200.00 - call.   20 lbs.

33 1/3% discounted. Die cut rear cago decking in 7 colors. 1/2" wide channels (55's were 3/4") This is not interior vinyl that has had channels heat sealed on and glued to ABS. This is the worlds finest replacement. Covers from rear seat to the tailgate. Price has been reduced while supply lasts. ND