Package includes;  Seat Covers for the 2 door models, preassembled door and rear quarter panels, sewn front armrest covers, cloth windlace set, Napped cloth headliner with center post boards and new matching sunvisors. Vinyl covered kick panels. Daytona carpet set and floor mats. Seat shell vinyl included. 70 lbs.

Includes Seat Covers for the 4 door model, preassembled 4 door rear panels and Dogleg boards, sewn front armrest covers, cloth windlace set attached to the center pillar post boards. Napped cloth headliner and matching sunvisors. Vinyl covered kick panels. Daytona carpet set and front and rear floor mats. Sewn seat shell vinyl covers included. 78 lbs.

Front & rear Bel Air Sedan Seat Covers for the 2 and 4 door models, in all the factory colors. Sewn using heavy weight correct grain vinyls and our exact reproduction pattern seat fabric. All top stitched and attaching listing sewn on. Seat shell vinyl included. Very correct in every way. 17 lbs.

Bel Air 2 door or 4 door front seat cover available in all the factory colors. Made using heavy weight correct grain vinyls and our exact reproduction seat cloth. Installation lists are sewn on the the proper locations for tight correct fit. 10 lbs.

This universal kit is high density two layered foam in the size and shapes to repad each seat. This is the same foam we have used and tested when we install our seat covers.  We feel it is better than molded foam. Sold per seat, cushion and backrest. 

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup. .05 lb.

Replace your rusty, unusable front seat backrest springs with this new reproductions in the correct shape. Sold in right or left assemblies. State which side you are ordering, or both. Easy to install. 10 lbs.

These mounting brackets are used on 2 door, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

The original 1955 Bel Air Sedan pattern has been duplicated in the exact weave. Samples send on request. Price is per yard, 3 yards needed per car. Please specify number of yards in quantity when adding to your shopping cart. 2 lbs per yard.

Plain non-expanded 1955 Haircell grain vinyl in all the correct colors. This was used on the seats and door panels. Heavy weight 54" wide. Priced per yard. 3 lbs per yard. Price per yard

Made using new waterproof door boards with galvanized edge metal bands and nails. Durable, stain resistant all vinyl with heat sealed horizonal line pattern on panels. Sewn vinyl armrest covers. Also included is the cloth covered windlace set for the two door openings, vinyl covered kick panels. Two 44 lb boxes.

New Armrest assemblies and rubber pads installed. Vinyl armrests are covered and attached to the front door panels. $950.00  Ready to install your stainless on. Please call to order.

Made using new waterproof door boards with galvanized edge metal bands and nails. Heat sealed horizonal line pattern on panels. Sewn front and rear armrest covers. Also included is the center pillar post boards with cloth covered windlace set attached for all door openings, vinyl covered kick panels and vinyl covered rear Dogleg boards.    

Now Available... New Armrest assemblies and pads, vinyl armrests covered and attached to the 4 door panels. $1295. Please call to order.

This is the interior door and rear quarter stainless trim set for the 1955 Bel Air 2 door Sedan. A 12 piece set. Perfectly shaped and designed as the originals are. Separate pieces available. 5 lbs

This is the 1955 Bel Air 4 door Sedan door panel interior stainless. 14 piece set of exactly reproduced moldings.  Including for the rear Dog Leg panel.

Free installation when you purchase our Preassembled door panel kit.

This is the pair of armrest bases attached to metal support panels. The panels have bendable tabs like the originals for easy installation. Sold in pairs. 5 lbs.

These Black Rubber Pads are manufactured with the proper contour to fit the original metal armrest bases and the Ciadella reproduction armrest bases. These are just like the originals. Sold in pairs and ready to glue on. 2 lbs.

These door panel boards are presicion die cut for the front Bel Air doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. 10 lbs

Made to go from the front edge of the quarter post to the wheelwells. Die cut waterproof boards with punch outs for window cranks and armrests. Sold in pairs. 10 lbs.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the sedan door panels. Nails included. 4 lbs. 

4 door price is $160.00 for 4 door set. 8 lbs.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

These are stamped metal door panel finger cups for the front and rear door panels, with two screw holes. Sold individually.  0.5 lb.

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup.  0.5 lb.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. Price per pair 3 lbs.

This is a set of precut strips that attach to the cars interior body. The complete headliner and windlaces get stapled to these strips. Please specify 2 door or 4 door Sedan. 2 lbs.

7 metal headliner installation bows, curved to the proper contours for each specific model. 10 lbs.

Brushed cotton cloth (Also know as napped cloth) cut and sewn into correct fitting headliners. With all bow listings sewn in the proper sections. In original colors or many other colors available. We can aslo use perforated or patterned vinyl headlining material in many colors. Extra sunvisor cloth included. 10 lbs.

Installation Video -http://ciadellainteriors.blogspot.com/2011/10/ciadella-headliner.html

New Sunvisors manufactured using new boards, and rods. Padded and covered with the Napped cloth material to match your headliner. Vinyl edge bound and finger tip inserts with chrome tips added. 5 lbs.

Two grab straps that attach to the center pillar post. Vinyl covered over heavy support material, to match the windlace. Or we also make these in vinyl. 1 lbs.

This is a 2 piece set of 1/2" sponge rod that is covered with woven material. Ready to install with slide in kick panel cords and dash flaps. In the original color or any color you would like. 3 lbs.

Woven cloth covered 1/2" sponge rod with kick panel slide in cord and vinyl dash flaps. The 4 door set is sewn to center post boards (as picture). 10 lbs.

Cloth covered windlace in many colors is $7.50 per yard, call

2 Waterproof die cut center pillar post cardboards for the 2 door Sedans. 1 lb.

These are a pair of bare 4 door center pillar post cardboards that have been die cut to fit perefectly. Windlace is attached to these boards for the front and rear door openings.  14 board installing clips required. 

Center post cardboard clips. 14 needed for the 4 door Sedans. Sold individually.  14 are .05 lb.

These rear quarter die cut boards fit beside the rear seat and follow back towards the trunk on 4 door sedans. These should be covered with interior trim vinyl.  Sold in pairs. 2 lbs.

Attaches to the rear post on all Sedans, in front of the rear back window. These get covered with headliner vinyl or cloth. Sold in pairs. 1 lbs.

This is Black textured panel board die cut to properly fit the rear shelf behind the rear seat back and rear window.  6 lbs.

These are die cut boards to properly fit the rear package shelf in front of the rear window. We professionally vinyl cover these panels in the proper interior color for each model.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

Reproduced low loop, tightly woven nylon carpet material. 54" wide with latex foam underside. Sold 54" x 36" per running yard. 10 lbs per yard.

Pete Ciadella was the first to correctly manufacture the low loop Daytona carpeting in 1980. We have all the correct colors in this beautiful carpet with rubber backing. Comes with correct vinyl binding and heel pad. Double seamed at the top of the hump and at the door opening sides as they did from the factory. And jute padding underside. 20 lbs.

This trunk mat is made using our low loop "Daytona" carpet material that has latex foam backing. Cut to properly fit the trunk floor contour and shape, with or without spare tire cut out opening. Matching interior vinyl edge binding sewn on the outside edges to duplicate the interior floor carpet. 9 lbs.

Front & rear 4 piece set. Latex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors. Made with nibbed non-slip backing. 10 lbs.

FREE with interior purchase.

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set. 20 lbs.

Black Rubber Trunk mat. Molded to the shape of your 1955 trunk floor, with lines and cut out for spare tire. 16 lbs.

We cut and completely vinyl bind the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.  20 lbs.