Choose your Chevy below, to view kits, materials and parts for your vehicle:

 
1955 Chevrolet Bel Air Convertible
 
1955 Chevrolet Bel Air Convertible Interior Package.

 

Includes; Seat Cover Set and seat shell vinyl, preassembled door and side panels, sewn front & rear armrest and top piston covers, vinyl covered kick panels, Windlace set, Sunvisors. Convertible top boot, Daytona carpet set and mats. 70 lbs.  This interior package has been discounted, no further discount.

$2075.00
Qty.

 
1955 Chevrolet Bel Air Convertible Seat Cover Set.

 

Sewn in the authentic Saddle Stitched heavy thread vertical line pattern in all colors, with foam underside. In all original colors or colors of your choice. Heavy weight Haircell grain vinyls with all attaching listing sewn in the proper areas. Our Quality cutters and sewers have worked together 25 years. 23 lbs.

$695.00
Qty.

 
1955 Chevrolet Bel Air Convertible Front Seat Cover.

 

This is the two tone all vinyl front seat cover for the 55 Convertible. Heavy weight vinyl with thick White Saddle Stitching on the cushions and back rests. Available in all factory colors. Installation listings are sewn in the factory locations for perfect fit. Seat shell vinyl included. 13 lbs.

$455.00
Qty.

 
55-57 Metal Seat Divider Pieces

 

Seat Divider Metal Piece 1955-57 2 Door Models. Ciadella Interiors is the first to reproduce and offer this much needed part to complete the finished look on your front seat. Correct size and fit as originals. $19.95 for the pair of metal divider pieces, also available vinyl covered for $35.

$19.95
Qty.

 
55-57 Metal Seat Divider Pieces; Vinyl Covered

 

Seat Divider Vinyl Covered Metal Piece 1955-57 2 Door Models. Ciadella Interiors is the first to reproduce and offer this much needed part to complete the finished look on your front seat. Correct size and fit as originals. $35.00 Vinyl Covered, per pair. YOU MUST INDICATE YEAR and COLOR During Checkout.

$35.00
Qty.

 
1955 Chevrolet Bel Air Convertible Front Seat Foam .

 

This kit is high density two layered foam in the size and shapes to repad each seat. This is the same foam we have used and tested when we install our seat covers.  We feel it is better than molded foam. Sold per seat, cushion and backrest. 

$200.00
Qty.

 
1955 Bel Air Convertible Seat Foam.

 

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

$200.00
Qty.

 
1955 Chevrolet Front Seat Backrest Springs.

 

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights. Please state which side or both when ordering. 10 lbs.

$99.00
Qty.

 
1955 Chevrolet Convertible Rear Seat Frame Assembly.

 

This is the two section metal reproduction seat springs for bottom cushion and back rest. Shaped and sized to fit properly. 50 lbs.

$825.00
Qty.

 
1955 Chevy 210 & Bel Air Seat Shell Stainless Trim.

 

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

$46.00
Qty.

 
1955 - 57 Chevy Seat Shell Bracket.

 

These mounting brackets are used on 2 door, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

$79.95
Qty.

 
1955 Chevrolet Bel Air Convertible Plain Interior Vinyl.

 

We have all the correct 1955 colors and Haircell grain in stock. Heavy weight 54" wide. Used for seat covers, door panels, top boot, covering kick panels, armrests. Sold by the yard. Samples gladly sent. 3 lbs per yard.

$39.00
Qty.

 
1955 Chevrolet Bel Air Convertible Preassembled Door & Side Panels.

 

New precision die cut waterproof door boards with metal edge bands and nails. With Dielectric sealed imprinted lines and matching seat color vinyls. Also includes colored kick panels, sewn front & rear armrest covers, windlace set and rear upper convertible top piston covers. And extra plain vinyls. Door panel stainless trim not included. Two boxes at 44 lbs each with armrests attached.   New Armrest assemblies and rubber pads, vinyl armrests are covered and mounted to the door panels. $900.00. We will recover your rear armrests and top piston covers for $175.00  

$650.00
Qty.

 
1955 Chevy Bel Air Front Armrest Assembly.

 

This is the pair of armrest bases attached to metal support panels. The panels have bendable tabs like the originals for easy installation. Sold in pairs. 5 lbs.

$189.00
Qty.

 
1955 Chevy Bel Air Armrest Rubber Pads.

 

Black Rubber Pads are manufactured with the proper contour to fit the original metal armrest bases and the Ciadella reproduction armrest bases. These are just like the originals. Sold in pairs and ready to glue on. 2 lbs.

$69.00
Qty.

 
1955 Bel Air Convertible Front Armrest Covers.

 

Cut and sewn using correct trim vinyl and double needle stitched. These armrests always match the color or the Saddle stitche seat vinyl. In all the factory colors. These get wrapped and glued around the metal bases and rubber pads.
$69.00
Qty.

 
1955 Chevrolet Bel Air Convertible Stainless Interior Moldings.

 

For the front doors and rear quarter trim panels. Exactly shaped and contoured as the originals. Also includes rear armrest lower moldings. Sold as a set or individually. 5 lbs.

$265.00
Qty.

 
1955 Chevrolet Bel Air Convertible Door Panel Boards.

 

A pair of door panel boards that are presicion die cut for the front doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots.  10 lbs

$49.95
Qty.

 
1955 Chevrolet Bel Air Convertible Rear Quarter Boards.

 

A pair of Waterproof die cut boards made for the rear panel above the armrests.Pre-punched window crank or power window switch holes. Sold as a pair. 5 lbs.

$25.00
Qty.

 
1955 Chevrolet Bel Air Convertible Edge Metal Bands.

 

Galvanized metal door edge metal bands that go on the door panel edges and the bottom to attach the door board to the door.  Includes the straight bottom band that attaches to the door frame. Nails included. 4 lbs.

$89.00
Qty.

 
Chevrolet Replacement Door Panel Nails.

 

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

$7.50
Qty.

 
1955 Chevy Bel Air Convertible Door Panel Finger Cup.

 

This is a stamped metal door panel finger cup for the front door armrest pockets. Sold individually.  Two screw holes. 0.5 lb.

$11.95
Qty.

 
1955 Chevy Bel Air Convertible Door Panel Support Bracket

 

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup.  0.5 lb.

$10.95
Qty.

 
1955 Chevy Bel Air Convertible Seat Belts.

 

Seat belts with chrome quick release aircraft buckle. Woven color webbing to match the 1954 interior colors. Sold per pair or 2 people set, 68" long. price per pair, 3 lbs.

$50.00
Qty.

 
1955 Chevy Bel Air Convertible Sunvisors.

 

Sunvisors using new boards and metal mounting posts. Covered with matching seat vinyl with colored binding to match. Stainless tips. price per pair 5 lbs
$149.95
Qty.

 
1955 Bel Air Convertible Windlace Set.

 

Matching interior vinyl windlace set (4 pieces) made for the 1955 Convertible. Vinyl covered 1/2" round sponge rubber with dash side flaps and easy to install slide in kick panel cord. 5 lbs

$75.00
Qty.

 
1955 Chevy Bel Air Convertible Windlace Set with 1/4 Supports.

 

This windlace set is made with the upper rear 1/4 panel mounting supports and rubber end stops. For all 1955 - 1957 Convertibles. Sewn with the front kick panel slide in cords and dash flaps. Rears staple on. In all the correct colors for your year. 5 lbs.

$149.95
Qty.

 
1955 Chevy Bel Air Convertible Windlace End Supports & Tips.

 

These windlace end metal supports are for 1955-1957 2 door hardtops, Nomads and convertibles. They screw on to the upper rear quarter door jamb. Comes with correct black rubber tip ends to attach to your rear windlace strips. 1 lbs.

$59.95
Qty.

 
1955 Chevy Bel Air Convertible Kick Panels.

 

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

$15.95
Qty.

 
1955 Chevy Bel Air Convertible Daytona Carpet Set.

 

Pete Ciadella was the first to correctly manufacture the low loop Daytona carpeting in 1980. We have all the correct colors in this beautiful carpet with rubber backing. Comes with correct vinyl binding and heel pad. Double seamed at the top of the hump and at the door opening sides as they did from the factory. And jute padding underside. 20 lbs.

$375.00
Qty.

 
1955 Chevy Daytona Carpet Yardage.

 

Reproduced low loop, tightly woven nylon carpet material. 54" wide with latex foam underside. Sold 54" x 36" per running yard. 10 lbs per yard.

$75.00
Qty.

 
1955 Chevy Daytona Carpet Floor Mats.

 

Front & rear 4 piece set. Laytex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors.  Both sets have nibbed backing. 10 lbs.

 

$125.00
Qty.

 
1955 Chevy Bel Air Convertible Replacement Loop Carpet.

 

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set. 20 lbs.

$199.00
Qty.

 
1955 Bel Air Convertible Top & Pads.

 

Heavy weight GM Pinpoint grain vinyl. Cut from tested and true patterns. Heat sealed side panels, brass zipper rear window. Includes top pads, and front edge round windlace. Available in many colors. Tinted back window available. 20 lbs

$360.00
Qty.

 
1955 Chevy Bel Air Convertible Top Well.

 

Rear convertible top storage well. Cut and sewn to proper contour and shape using heavy weight black canvas. 3 lbs.

$65.00
Qty.

 
1955 Chevy Bel Air Convertible Top Boot.

 

Made out of matching interior vinyl with heavy support edge vinyl under snap areas. Vinyl edge binding. In all the original colors or any colors you choose. Chrome snaps included and your upholstery person or yourself can attach them for a perfect fit. 7 lbs

$250.00
Qty.

 
1955 Chevy Bel Air Convertible Daytona Carpet Trunk Mat.

 

This trunk mat is made using our low loop "Daytona" carpet material that has latex foam backing. Cut to properly fit the trunk floor contour and shape, with or without spare tire cut out opening. Matching interior vinyl edge binding sewn on the outside edges to duplicate the interior floor carpet. 9 lbs.

$285.00
Qty.

 
1955 Chevy Bel Air Convertible Rubber Trunk Mat.

 

Black rubber countour molded mat with spare tire cut out. Molded vertical lines, exactly like the original. 16 lbs.

 

$100.00
Qty.

 
1955-57 Loop Carpet Trunk Mat.

 

We cut and completely vinyl bind the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.

$125.00
Qty.

© 2014 by Ciadella Interiors. All rights reserved.

CIADELLA INTERIORS   |   3116 S. 52ND STREET   |   TEMPE, AZ 85282   |   602.454.8388  or  1.800.875.8390   |   sales@ciadellainteriors.com