Includes; Correct Seat covers with Tuck and Roll seat caps and backrests (not heat sealed pleats) and seat shell vinyl, preassembled door panels with installed armrest bases and pads, and covered armrests (OS shipping)  and rear side panels, wheelwell covers, 6 piece windlace set, perforated vinyl headliner and sunvisors. Vinyl covered kick panels and above the wheelwell boards. Daytona carpet set and floor mats. 135 lbs.

Seat Covers sewn by professionals that have been sewing Chevrolet interiors for over 25 years each. This is what is called Waffle Pattern Interior. Sewn Tuck & Rolled seat caps (not heat sealed pleats) and back rests, Dielectric Waffle pattern vinyl with latex foam underside. Installation listing installed. Extra seat shell vinyl included. In all factory correct colors or colors you choose. 30 lbs.

 We can make the Waffle or plain vinyl any color you choose. No Extra Charge.

This kit is high density layered foam in the size and shape to repad each seat. For 2 door front seat. This is the same foam we have used and tested when we install our seat covers.  We feel it is better than molded foam. Sold per seat, cushion and backrest. Ships in 2 large boxes

 Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required.  Just hog ring this foam over burlap to the upper and lower springs. Ships in 2 large boxes.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

Replace your rusty, unusable front seat backrest springs with these new reproduction sections. Easy to install in the factory attaching metal. Sold individually in lefts and rights. Please state which side or both when ordering. 10 lbs.

Our reproduction 1955 Nomad Waffle seat and door panel vinyl is correctly embossed in deep "Waffle" pattern . In all the 1955 vinyl colors or any color vinyl you choose. Supported latex foam padded underside. Sold by the 3/4 yard, 54" wide. Samples sent upont request. 5 lbs per yard.

Plain 1955 Haircell grain non-expanded heavy vinyls in all the original colors. 54 inches wide. price per yard 3 lbs per yard.

These are a pair of complete door panels with armrest bases and supports installed to new water proof door panel boards. Galvanized edge metal bands with nails. New armrest bases and rubber pads installed and covered. NO NEED TO SEND YOURS. All you have to do it add your stainless trim and embossed Waffle lower panel. Available in all factory colors or we can make colors to your specifications. 35 lbs.

Front door and rear panels, using new die cut waterproof boards with edge metal bands with nails installed. Waffle pattern vinyl upper sections and center sewn armrest covers. Vinyl covered kick panels, sewn 6 piece windlace set, sewn wheelwell covers and Waffle covered above the wheelwell boards.  Shipped in two boxes 45 lbs. each.

Price includes; Installed New armrest bases & new rubber pads, you don't have to send yours.

All the correct front door, rear quarter trim and above the rear wheelwells moldings (20 pieces). Does not include the stainless Waffle lower panels, which is available from Ciadella Interiors. 10 lbs per set.

Front armrest bases that attach to the door boards. For both doors consists of ABS plastic contour shaped to duplicate the 1955 Nomad armrest base. Easy to install on the door boards by sewing them on, or riveting them on to new boards. Rubbers armrest pads available. 2 lbs.

 Molded Black rubber contour shaped to fit the original metal armrest bases and Ciadella reproduction armrest assembly. These were made for the 55' Nomad only pads. 2 lbs.

These door panel boards are presicion die cut for the front and rear doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. Sold in pairs @ $49.00 per pair. 10 lbs per 2 door boards.

For all years and models. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup. 0.5 lb. 

 Die cut to fit properly and be exactly like originals, with vent holes. Beige, Ivory or Coral interior vinyl covered as original. Or any color you choose. Stainless not included, but available. 4 lbs.

Properly shaped die cut heavy boards made to install to the Nomad roof pillar and these would be covered by the headliner vinyl. Roof light switch punchout. Sold in pairs. 1 lbs.

Attach to the inner roof panel. Black precut strips are for stapling the complete headliner and side pillar headlining. In the factory thickness and lenghts for the specific locations. 4 lbs.

New sunvisors with new boards and metal posts. Padded and covered with matching headliner perforated vinyl with colored binding to match. Stainless tips. price per pair 5 lbs.

This is a 6 windlace strip set of vinyl covered 1/2" sponge rod in all the correct 55' colors. The front 2 windlace are a different color as the originals were, or we can make them all one color. Made with slide in kick panel attaching cord and upper dash flaps. 5 lbs.

These windlace end metal supports are for 1955-1957 2 door hardtops, Nomads and convertibles. They screw on to the upper rear quarter door jamb. Comes with correct black rubber tip ends to attach to your rear windlace strips. 1 lbs.

This windlace set is made with the upper rear 1/4 panel mounting supports and rubber end stops. For all 1955 - 1957 Convertibles. Sewn with the front kick panel slide in cords and dash flaps. Rears staple on. In all the correct colors for your year. 5 lbs.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. price per pair 3 lbs.

Pete Ciadella was the first to correctly manufacture the low loop Daytona carpeting in 1980. We have all the correct colors in this beautiful carpet with rubber backing. Comes with correct vinyl binding and heel pad. Double seamed at the top of the hump and at the door opening sides as they did from the factory. And jute padding underside. 20 lbs.

54" wide low loop, tightly woven Nylon carpet. Latex foam underside. Can be used for cargo area covering. 5 lbs per yard.

Front & rear 4 piece set. Laytex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors.  Both sets have nibbed backing. 10 lbs.  FREE with interior package purchase.

Ciadella replacement loop carpet mats for front and rear with nubbed non slip backing  10 lbs.

FREE with interior package purchase.

Daytona carpet die cut to fit from the back seat panels to the tail gate. With or without spare tire panel cut out. Loop carpet seat available $200.00 - call. 20 lbs.

Tight weave loop carpet cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set.  20 lbs.

Textured grain black rubber rear floor covering for under the rear seat. Contour Molded. 12 lbs.

This is a die cut cargo area replacement carpet kit to match the floor carpet set. This 5 piece seat includes backs of rear seats, cargo area floor, spare tire lid and tailgate. 20 lbs.

33 1/3% discounted. Die cut rear cago decking in 7 colors. 1/2" wide channels (55's were 3/4") This is not interior vinyl that has had channels heat sealed on and glued to ABS. This is the worlds finest replacement. Covers from rear seat to the tailgate. Price has been reduced while supply lasts. ND

1955-1957 Station Wagon; Cargo area wood decking with shock cut outs and spare tire lid tabs. Four 1/2" thick plywood sections. 20 lbs.