Superb Houndstooth vinyl insert Seat covers, (Or we can use non-original Hardtop cloth). preassembled door and rear trim panels with window felts and door lock ferrules included. Sewn armrests and top piston covers, windlace set and sunvisors. Convertible top boot, vinyl covered kick panels, Tuxedo carpet set and floor mats. 70 lbs.

* You must send us your upper door and rear trim panel rails or purchase ours.

Convertible used an all vinyl interior. Sewn using plain Seville crush grain vinyls. Our Houndstooth seat insert vinyls are exactly like NOS, with vertical lines. And heat sealed line pattern behind the front seat back rests. We have all the factory color combinations. Installation listing is attached. 20 lbs

1960 Impala Convertible all vinyl front seat cover. Made using correct heavy weight Seville grain vinyls in two colors and our printed Houndstooth pattern insert vinyl. All installation listings sewn in the factory locations for a great fit. Available in all the factory color combinations. 12 lbs

High density foam cut and shaped to the correct shape for seat cushion and backrest. 1/2" scrim foam topper. We have used this in our shop when installing seat covers. We feel our layered foam works better than molded foam. Sold per seat for front or rear.  20 lbs per seat.

Rear bench seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required. 

Heavy weight non expanded Seville crush grain vinyl as used in 1959 -1964 Chevrolets. Manufactured in all of factory colors, 54" wide. Samples sent on request. 3 lbs per yard.

This embossed seat insert Houndstooth vinyl is an exact copy of NOS. Now available in all th 1960 interior colors. Priced per yard by 54" wide. Seat insert vinyl has with vertical lines.  Door panel vinyl does not have the vertical lines.

New waterproof die cut panels and galvanized door edge bands with nails attached. Correct Seville grain vinyls in two colors and Houndstooth vinyl design insert panels. Upper Mylar stripes on the top and heat sealed lower line design pattern. Window felts are lock ferrules are attached. Included are vinyl covered kick panels, set of windlace, presewn rear armrest & top piston covers, extra Seville vinyl for front armrests. 40 lbs

Send us your 4 cleaned unpainted rails or purchase ours and we will attach them FREE.

This is the 1957 Bel Air armrest assembly we reproduced in many colors. Complete with plastic base, vinyl covered rubber pads, ready to mount. Next picture is the 1962-64 Impala. Both look good on 1960 Impalas. Call please. 5 lbs pair.

These were reproduced by Ciadella Interiors out of metal, just like the factory ones. Replace your old rusty ones with these. Sold in pairs. 5 lbs per pair.

This is a pair of die cut waterproof boards made specifically for the 1960 Impala Convertible front doors. All holes for handles, window cranks and trim are pre-punched. Punch outs for power window switches. 10 lbs

Contour shaped Galvanized metal with embossed teeth for holding the vinyl tight. Installation nails included. $89.00 per 2 doors. 4 lbs per set.

These are exactly shaped and contoured ABS plastic to match the original 1960 Impala Convertible rear upper trim panel rails. Sold in pairs @ $75.00. 3 lbs

 1960 Convertible die cut rear trim boards, ready to install your upper rails to. Sold in pairs. 5 lbs

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for  for $7.50 with Free Shipping..

A pair of anti rattle lock knob ferrules. Round stainless top with inner felt. Easy to install, by bending the tabs on to the upper rails. Sold in pairs.  0.5 lb

Can be installed on all models. Complete with foamed under support. Covered with Seville grain vinyl as the originals were. Ready to glue onto the metal dash. In all the 1960 colors. This is not a hard plastic dash top cap. 20 lbs.

These are a pair of die cut heavy boards we professionally cover with interior vinyl. Sold in pairs for $59.95

This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 for two.. 3 lbs pair.

Reproduced Sunvisors using new boards and support rods. Padded and covered with the 1960 Seville crush grain vinyls in all colors. Completely edge bound. Sold as a pair. 5 lbs.

This is a Black canvas convertible top storage well. Cut and sewn to duplicate the original and give protection to the top when it is down. We can also make this in your interior color. 3 lbs.

Our convertible tops are made by a manufacturer that has been around a long time and have tested the fit of these Pinpoint vinyl convertible tops. Heat sealed sides with matching edge binding. Plastic back window with a brass zipper. Pads included. Tinted plastic rear window optional. 20 lbs

Made out of 1960 Seville grain vinyl in all the correct colors with matching edge binding and hidden snaps. Support vinyl on the underside edges and foam padding on the convertible rail sides. Ready to snap on. 10 lbs

This is 4 pieces of 3/8" round sponge rod that is covered with the correct Seville grain interior vinyl. Staple in place for front kick panel area and rear of door opening. 3 lbs.

This is solid color 80/20 loop carpet set ( Not the Tuxedo)  These are molded carpet sets in many colors that have jute underlay. Vinyl edge binding and plastic ribbed heel pad. Fit is good and will need trimming of excess carpet material.

This item has additional shipping charges due to heavy weight or oversize dimensions.

 This is a molded carpet set for the 1960 Chevy's. Pressure and heat molded to the contour of the floor pan. Jute padded underside, vinyl heelpad. Covers front and rear areas, Some trimming required of excess carpet material. Should be gluded to floor for better fit. 

This item has additional shipping charges due to heavy weight or oversize dimensions.

A 4 mat set for front & rear using Tuxedo carpet. Contour shaped for proper fit. Nibbed underside for non sliding. Matching vinyl edge binding. Plain loop carpet mats are $85.00 10 lbs.