Included in this Package is;

 Seat covers, 4 Preassembled door panels with window wipes ane lock ferrules. Windlace with vinyl covered center post boards and rear dogleg boards. Headliner and sunvisors, vinyl covered kick panels. Sewn rear wheelwell covers. Tuxedo carpet set and matching floor mats. 89 lbs.

You must send us your 4 upper door panel rails and 2 rear Dogleg rails, or call us for availability of good used.

Patterned from excellent original set of seat covers from a 1960 Nomad Station Wagon. Available in all factory colors with two colors of vinyl and our heavy weight Houndstooth seat insert cloth with vertical woven lines. All installation listings are attached. You will not be disappointed. 19 lbs

Patterned from excellent original set of seat covers from a 1960 Nomad Station Wagon. Available in all factory colors with two colors of vinyl and our heavy weight Houndstooth seat insert cloth with vertical woven lines. All installation listings are attached. You will not be disappointed. 19 lbs

This is a listing for the 1960 Chevy 3rd seat cover. Matches the original with the Seville grain vinyls and the Houndstooth seat insert cloth. Available in all the factory colors or your choice of colors.

Can be installed on all models. Complete with foamed under support. Covered with Seville grain vinyl as the originals were. Ready to glue onto the metal dash. In all the 1960 colors. This is not a hard plastic dash top cap. 20 lbs.

For front bench seat. High density foam shaped to fit to the 1960 4 door front seat springs.  $150.00 per seat.

Excellent low price replacements, which we use for installations in our shop.  20 O.S. lbs per seat foam set.

Rear bench seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Heavy weight non expanded Seville crush grain vinyl as used in 1959 -1964 Chevrolets. Manufactured in all of factory colors, 54" wide. Samples sent on request. 3 lbs per yard.

Heavy weight with correct Houndstooth pattern. 60" wide with latex backing. We have all the factory colors. Just like NOS and only $49.95 per yard.

These preassembled doors, side panels and Doglegs were made specifically for this 1960 Impala Station Wagon and are very labor intense to make. An exact reproduction of the original 4 doors and side panels using die cut boards, galvanized edge metal with nails installed. Two colors of Seville vinyl, Houndstooth center insert, upper vertical mylar strips, heat sealed lower pleated pattern.. Upper door felts and lock knob ferrules included. Also includes vinyl covered kick panels, windlace set with center post boards and outer vinyl cover. Rear dog leg vinyl with mylar strips, sewn wheelwell covers and extra vinyl. 45 lbs.

 *You must send us your 4 upper door and 2 Dogleg rails or call for availability of used ones.

This is the 1957 Bel Air armrest assembly we reproduced in many colors. Complete with plastic base, vinyl covered rubber pads, ready to mount. Next picture is the 1962-64 Impala. Both look good on 1960 Impalas. Call please. 5 lbs pair.

Good used upper metal door rails and Dogleg rails for the 1960 Chevy Station Wagons. We only sell these to customers that order Preassembled Door Panels. Or if they need separate ones. Buy all 6 rails for $250.00  5 lbs pr.

These die cut waterproof boards are available for 4 door front door panels. All door handle and window crank holes are pre-punched. Power window switch push outs are marked. Sold in pairs for front.

Buy a 4 front & rear door boards for $89.95 10 lbs per pair.

Contour shaped for the 60 Nomad, Galvanized metal with embossed teeth for holding the vinyl tight. Installation nails included. 4 door 12 piece set.  8 lbs.

Die cut boards waterproof rear door panels for the 1960 Station Wagon. With Armrest holes, and window crank holes or punch outs for power windows. 10 lbs per 2 doors.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for for $7.50 with Free Shipping..

A pair of anti rattle lock knob ferrules. Round stainless top with inner felt. Easy to install, by bending the tabs on to the upper rails. Sold in pairs.

Inner boards with windlace sewn on and outer vinyl covered boards. Extra woven cloth covered 3/8" sponge rod for all the doors in many colors. Attaching clips are $1.25 ea.

This is a a pair of Station Wagon cardboards that attach to upper metal rails. And positioned behind the rear doors, beside the rear seat. Die cut boards that are sold in pairs. 4 lbs.

These are a pair of die cut heavy boards we professionally cover with interior vinyl. Sold in pairs for $59.95

This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 for two.. 3 lbs pair.

Never before offered in every color. Ciadella reproduced the 1960 Houndstooth headliner vinyl in all the factory colors. Sewn to the proper configuration for the 1960 Station Wagon. Extra sunvisor vinyl included. Why buy a non correct carbon fiber substitute. 10 lbs

New reproduction sunvisors made in the shape of the original 1960 sun visors. Using new fiberboards padded and covered with matching Houndstooth vinyl headliner material. Vinyl edge binding with chrome end tips. We can make special color headliners and sun visors. Sold in pairs. 5 lbs

These are a pair of double stitched (French Seam) Seville vinyl rear wheelwell covers in the correct shapes. All colors of vinyl available. 5 lbs

This is solid color 80/20 loop carpet set ( Not the Tuxedo)  These are molded carpet sets in many colors that have jute underlay. Vinyl edge binding and plastic ribbed heel pad. Fit is good and will need trimming of excess carpet material.

This item has additional shipping charges due to heavy weight or oversize dimensions.

This is a molded carpet set for the 1960 Chevy's. Pressure and heat molded to the contour of the floor pan. Jute padded underside, vinyl heelpad. Covers front and rear areas, Some trimming required of excess carpet material. Should be gluded to floor for better fit.  Ships Oversize.

A 4 mat set for front & rear. Contour shaped for proper fit. Nibbed underside for non sliding. Matching vinyl edge binding. In all the factory correct colors.  In all the original 1960 "Salt n' Pepper" colors. Plain loop carpet mats are $85.00 set.   10 lbs.

We had this decking manufactured with the correct 1/2" grooves in 7 colors. Heavy weight pvc (not two pieces of vinyl) 60" wide. We sell you enough to redo the backs of the seats and cargo area for $200.00. While supply lasts. 33 lbs