Includes front buckets and rear seat covers, preassembled door and rear trim panels with new window felts and door lock ferrules. Sewn rear armrest covers, and Convertible top piston covers. Windlace set, vinyl covered kick panels. Star pattern headliner, sail panel material on Hardtops. Sunvisors. Convertibles get a top boot. Molded Tuxedo carpet set and floor mats.

*You must send your clean upper door and rear quarter rails or purchase our reproductions.

Super Sport Seat Covers for buckets and rear seat. Using heavy weight Seville grain vinyls and Correct Black embossed Barber Pole striped seat insert vinyl. Buttons are attached on the upper backrest panels. Pleated on the rear of the front bucket seat backs. Installation listings attached. In all the 1962 colors. We can also use Impala seat insert cloth. Our opinion is that these are the finest available. 25 lbs.

 2 Exact as original Bucket Seat Covers. Super Sport Bucket Seat Covers are made using the correct crush grain trim vinyl and all matching colors inserts with Black embossed Barber Pole pattern with foam undersides. Buttons attached on the upper backrest areas. All installation listings sewn in the correct factory locations. Samples sent upon request.  We will not sell one bucket seat cover.12 lbs

This is an exact reproduction of the 1962 S/S seat insert vinyl. Also know as "Barber Pole" striped vinyl with Black imprinted on the embossed vinyl. Available in all colors, 54" wide. Samples gladly sent. 3 lbs per yard.

 This is the Seville Crush grain non-expanded vinyl in all the 1959 to 64 colors including Gold (Yellow). Heavy weight 54" wide. Sold by the yard. 3 lbs per yard. Samples gladly sent.

Original style and size Stainless seat cover and door panel button with prongs and retainer. Correct recessed center. Sold indiviidually,  0.5 lb. for 4 buttons.

High density latex foam that is contour molded to the proper size and shape for bottom cushion and backrest. Sold per seat. 10 lbs for each pair of bucket seat buns.

Universal Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required. 20 lbs. 

This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 for two.. 3 lbs pair.

Two sections of correctly contoured dash pieces using the correct Seville grain covering in all factory colors. This complete reproduction padded dash is not a dash cap. Quality materials for an original fit and appearance. This padded dash will install easily in your 1961-62.

New waterproof door and quarter boards with Galvanized edge metal bands and nails attached. Heat sealed upper block design with stainless buttons installed and lower heat sealed horizontal line vinyl. Included are sewn rear armrests and top piston covers. Vinyl covered kick panels, windlace set, front armrest vinyl. Includes upper window felts and door lock knob ferrules. No door panel stainless included. $725.00 with the rails you send us or no rails, $925.00 with new metal rails.  40 lbs.

We can install your rails or our reproduction upper rails for FREE.

Ciadella Interiors reproduced these out of metal as they were originally. Stamped metal to the correct curved shape for the front doors. Sold in pairs.  5 lbs pair. 

Die cut waterproof boards made for the 1962 Hardtop and Convertible doors. With all holes and slots for stainless trim, armrest mounting and handles. Sold in pairs. 10 lbs.

Door Edge Metal Bands for all models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges. $89.00 set. 4 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

Exact reproduction. Proper size and shape to fit correctly. Replace your old rusty originals with our reproductions. Made out of metal.  5 lbs.

Die cut rear quarter interior boards. Attaches to the upper rails and gets trim vinyl covered. Sold in pairs.

Exact duplicate of the originals. Made of metal custom made for attaching to the 1962 Convertible rear trim boards. Sold in pairs. 5 lbs pair.

Waterproof die cut convertible quarter panel rear boards. Replace your warped, missing cardboards with these exact fitting pair. 5 lbs.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails 0.5 lb

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

1962-63-64 Impala front armrest rubber pad and pvc under support. Sold in right and left pairs.  We are the only company that sells them without being vinyl covered. Ready to staple or glue the vinyl onto. And we also sell them vinyl covered.

These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors.  Ready to install on your plastic armrest bases.

This is a pair of exactly duplicated chromed plastic armrest bases for 1962 - 1964 Impala. Right and left side supports that the armrest pads mount to.

 A pair of chromed plastic armrest bases with new under pad and covered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

This is a pair of die cut heavy weight board that has be covered with interior trim vinyl.  Let us know if your 62' has factory air conditioning. 

This is a die cut package tray panel board. That fits the rear shelf behind the rear seat back and rear window. And has vinyl covered foam front edge and completely covered with matching interior trim vinyl. Specify model. 6 lbs

Sewn Headliner using the correct "Star Pattern" embossed vinyl in all colors. With extra sunvisor and rear panel material included. 10 lbs.

Star pattern vinyl installed over new die cut boards with the push outs for the dome light assemblies. Small top edge bead welt bead as original. Sold in pairs. 5 lbs.

Reproduced Sunvisors using new boards and support rods. Padded and covered with the 1962 embossed Star pattern vinyl sunvisors for Hardtops, in all colors. Completely edge bound. Sold as a pair. 5 lbs.

We have all the original colors including Gold (Yellow) in our exact reproduction "Star" pattern headliner weight vinyl.l. 54" wide. 1 lb per yard.

 3/8" round sponge rubber rod that we cover with 1963 Seville grain vinyl. In all the factory colors or your choice of color. These are for the rear of the kick panels and  two pieces that staple to the front of the rear quarter trim. 3 lbs.

Reproduced Sunvisors using new boards and support rods. Padded and covered with the 1962 Seville crush grain vinyls on Convertibles $149.95 in all colors. Completely edge bound. Sold as a pair. 5 lbs.

This is a Black canvas convertible top storage well. Cut and sewn to duplicate the original and give protection to the top when it is down. We can also make this in your interior color. 3 lbs.

This is a heavy 38oz Pinpoint grain Convertible top with heat sealed side panels. Plastic back window with brass zipper. Top pads included. Available in many colors. Tinted plastic rear window optional. 20 lbs

This convertible top boot is designed to match the original. Made out of matching interior vinyl color. Reinforced undersides and foam padded under both sides. Snaps are hidden. 10 lbs.

This is solid color 80/20 loop carpet set ( Not the Tuxedo)  These are molded carpet sets in many colors that have jute underlay. Vinyl edge binding and plastic ribbed heel pad. Fit is good and will need trimming of excess carpet material. 21 lbs.

This is the correct reproduction molded 80/20 loop carpet with the Black threads woven throughout. Known as the Salt n' Pepper carpet. Let us know if your 62' was a factory 4 speed car. Jute padded underside and heelpad attached. In all the 62' colors.

A 4 mat set for front & rear. Contour shaped for proper fit. Nibbed underside for non sliding. Matching vinyl edge binding. In all the factory correct colors. 10 lbs.   In all the original 1962 "Salt n' Pepper" colors or plain solid color mats are $85.00.