|1962 Chevrolet Impala Convertible
|1962 Chevy Impala Convertible Interior Package.|
Exact duplicate of the original seat covers using "Barber Pole" insert with side chrome embossed welt. Preassembled door and rear quarter trim panels with window felts and lock ferrules installed. Windlace set, sewn rear armrests and convertible top piston covers and a pair of vinyl Sunvisors. Extra trim vinyl. Convertible top boot. Tuxedo carpet set and floor mat set. 75 lbs.*You must send us your door and quarter upper metal rails or purchase ours.
|1962 Impala Convertible Seat Cover Set.|
These are an exceptional duplication of the original 1962 Impala Convertible Seat Covers. Heavy weight Seville crush grain vinyl with heat sealed lines on the front seat backs. Sewn using our reproduction imprinted black "Barber Pole" vinyl inserts (as picture) with chrome mylar welt around all inserts. And upper buttons attached in the upper back rest panels. All seat installation listing is sewn on. We consider these the best available. We can also use the 1962 Impala seat cloth. 20 lbs
|1962 Impala Convertible Front Seat Foam|
Convertible Front Seat Foam-High density foam cut and shaped to the correct shape for seat cushion and backrest. 1/2" scrim foam topper. We have used this in our shop when installing seat covers. Sold per seat for front. 20 lbs per seat.
|1962 Chevy Impala Convertible Rear Seat Foam.|
1962 Convertible Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required.
|1962 Impala Interior Trim Vinyl.|
This is the Seville Crush grain non-expanded vinyl in all the 1962 colors including Gold (Yellow). Heavy weight 54" wide. Sold by the yard. 3 lbs per yard.
*Cut yardage is not eligible for return or exchange.
|1962 Impala Convertible Preassembled Door & Rear Quarter Trim Panels.|
New waterproof door and quarter boards with Galvanized edge metal bands and nails attached. Heat sealed upper block design with stainless buttons installed and lower heat sealed horizontal line vinyl. Included are sewn rear armrests and top piston covers. Vinyl covered kick panels, windlace set, front armrest vinyl. Window wipes included as are the door lock knob ferrules. No door panel stainless included. 40 lbs.
We can install your rails or our reproduction upper rails for FREE.
|Impala Door Panel Reflector|
Reproduction Door Panel Reflector. Same size, finish and fit as original.
|1962 Chevy Impala Convertible Door Panel Upper Rails|
1962 convertible front and rear quarter trim rails. They are the same size, shape and curved as the originals are. Sold in complete set for the front doors and rear quarter panels. Only available with the purchase of Ciadella Pre-Assembled Door Panel Set.
|Door Panel Edge Metal Bands.|
Door Edge Metal Bands for all models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges. $89.00 set. 4 lbs.
Special Order Item. Not eligible for return.
|Chevy Door Panel Replacement Nails for all models.|
These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold per 10 for $7.50 with Free Shipping..
|1962-1964 Impala Door Panel Retainers|
Reproduction Door Panel Retainers- Exact size and fit as the originals. Sold in set of 20 for $10.
|Door Lock Knob Bezels - 2|
A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails 0.5 lb
|1961 to 1965 Plastic Lock Knob Ferrules (2)|
These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing. Weight is 0.5 lbs per 2.
|1962 Chevy Kick Panels.|
This is a pair of die cut heavy weight board that has be covered with interior trim vinyl. Let us know if your 62' has factory air conditioning.
|Black Rubber Front Armrest Pads.|
1962-63-64 Impala front armrest rubber pad and pvc under support. Sold in right and left pairs. We are the only company that sells them without being vinyl covered. Ready to staple or glue the vinyl onto. And we also sell them vinyl covered.
|1964 Vinyl Covered Armrest Pads.|
These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors. Ready to install on your plastic armrest bases. Sold in pairs.
|1962 Chromed Front Plastic Armrest Bases.|
This is a pair of exactly duplicated chromed plastic armrest bases for 1962 - 1964 Impala. Right and left side supports that the armrest pads mount to.
|1962 Impala Front Armrest Assembly (2)|
A pair of chromed plastic armrest bases with new under pad and covered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs
|Chevy Convertible Sun Visors.|
Reproduced Sunvisors using new boards and support rods. Padded and covered with the 1962 Seville crush grain vinyls in all colors. Completely edge bound. Sold as a pair. 5 lbs.
|1962 Chevy Impala Seat Belts (2) |
This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 5 lbs.
|1962 Chevy Impala Convertible Top Well.|
This is a Black canvas convertible top storage well. Cut and sewn to duplicate the original and give protection to the top when it is down. We can also make this in your interior color. 3 lbs.
|1962 Impala Convertible Top & Pads.|
1962 Impala Convertible Top- Made from a heavy pinpoint grain vinyl. Convertible top with heat sealed side panels. Plastic back window with brass zipper. Top pads included. Available in many colors. Tinted plastic rear window optional.
If you would like a custom top (color, glass back window, canvas, etc) please call to inquire and place your order.
|1962 Convertible Top Boot.|
This convertible top boot is designed to match the original. Made out of matching interior vinyl color. Reinforced undersides and foam padded under both sides. Hidden snaps. 10 lbs.
|1962 Impala Convertible Replacement Loop Carpet Set.|
This is solid color 80/20 loop carpet set ( Not the Tuxedo) These are molded carpet sets in many colors that have jute underlay. Vinyl edge binding and plastic ribbed heel pad. Fit is good and will need trimming of excess carpet material. 21 lbs.
|1962 Chevy Impala Convertible Tuxedo Carpet Set.|
This is the correct reproduction molded 80/20 loop carpet with the Black threads woven throughout. Known as the Salt n' Pepper carpet. Specify if your 62 is a factory 4 speed car. Jute padded underside and heelpad attached. In all the 62' colors. 21 lbs.
|1962 Tuxedo Carpet Floor Mats|
A 4 mat set for front & rear. Contour shaped for proper fit. Nibbed underside for non sliding. Matching vinyl edge binding. In all the factory correct colors. 10 lbs. In all the original 1962 "Salt n' Pepper" colors. Plain mats are $85.00 set.