Includes front buckets and rear seat covers, preassembled door and rear trim panels with new window felts and door lock ferrules.. Sewn rear armrest top piston covers, windlace set, vinyl covered kick panels. Convertible top boot. Sunvisors. Molded 80/20 carpet set and floor mats. We can also make a White interior at no extra cost. 80 lbs.

*You must send your clean upper door rails or purchase our reproductions. 

This S/S Hardtop package includes front buckets and rear seat covers, preassembled door and rear trim panels with new window felts and door lock ferrules.. Sewn rear armrest covers, windlace set, vinyl covered kick panels. Star pattern headliner, sail panel material and Sunvisors. Molded 80/20 carpet set and floor mats. We will also make a White interior at no extra cost. 80 lbs.

*You must send your clean upper door rails or purchase our reproductions.

S/S Seat Covers for front bucket seats and rear bench seat. Heavy weight Seville grain vinyl and our correct Heat Sealed pleated Seville vinyl with latex foam underside. In all colors. Upper buttons installed. All installation listing sewn on for correct fit. 30 lbs.

For Seat Covers with cloth inserts please use Regular Hardtop price. White Interior available at No Extra Charge.  You must specify Hardtop or Convertible when ordering.

We will not sell single Bucket Seat Cover.

 A pair of Bucket Seat Covers for 1963 Super Sports. Made using heavy weight Seville Crush grain vinyl for both plain and pleated inserts. Deep correct width pleats with dense foam underside. All installation listings sewn in the proper locations for a great fit. All colors available, we can also make them in White at no extra charge. 15 lbs.                    We will not sell a single Bucket Seat Cover.

High density contour molded latex seat foam for one bottom cushion and one backrest. Sold per seat. 10 lbs per bucket seat.

High density Contour molded latex seat foam for one bottom cushion and one backrest. Sold per seat. Please specify if your ordering for a Hardtop or Convertible.  20 lbs

This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1963 colors. Sold by the yard. 3 lbs per yard.

Heat Sealed correct Seville crush grain vinyl with the pleat width and depth as the original. In all 1963 colors and we also have White pleated vinyl or Seat Covers. Sold by the yard. 5 lbs per yard in many non original colors.

Embossed vinyl that resembles Crushed Ice, for the lower scuff section of the door panels. In all the correct colors, 54 inches wide. 3 lbs per yard.

Correct size round stainless recessed buttons for the door panels and seat backrests. Comes with prong legs and lock retainer clips. 0.5 lb. per 4 buttons.

Preassembled Door and Rear Panels; Die cut waterproof boards with door edge metal bands and nails. Heat sealed upper block pattern with stainless buttons installed and lower Crushed Ice vinyl or we can install carpeting. Sewn windlace set, rear armrests and piston covers on Convertibles. Vinyl covered kick panels. Included and installed are the window wipe felts and door lock knob bezels. We can make in non original color or your choice.  No door panel stainless included.  40 lbs.

 We can install your rails or our reproduction upper rails FREE.

These are a pair of die cut heavy boards that are covered with 1963 interior trim vinyl in all the factory colors. Please state if your 1963 has factory air conditioned. 2 lbs.

Reproduced metal front door rails that are an exactly like the originals. Easy to install by hammering them on to new boards. Stamped metal to the correct curved shape and contour for the upper front doors. Sold in pairs. 5 lbs pair.

Die cut waterproof boards made for the 1963 Hardtop and Convertible doors. With all holes and slots for stainless trim, armrest mounting and handles. Sold in pairs. 10 lbs.

Door Edge Metal Bands for all models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges. $89.00 set. 4 lbs.

Reproduction rear quarter trim metal upper rails, Curved and designed just like the factory ones. Add your trim boards to these rails and install your upholstery. Sold in pairs for the hardtops or convertibles. Please specify which model.

Waterproof die cut convertible quarter panel rear boards. Replace your warped, missing cardboards with these exact fitting pair. 5 lbs.

2 Door Hardtop die cut rear quarter interior boards. Attaches to the upper rails and gets trim vinyl covered. Sold in pairs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails 

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

1962-63-64 Impala front armrest rubber pad and pvc under support. Sold in right and left pairs.  We are the only company that sells them without being vinyl covered. Ready to staple or glue the vinyl onto. And we also sell them vinyl covered.

These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors.  Ready to install on your plastic armrest bases.

This is a pair of exactly duplicated chromed plastic armrest bases for 1962 - 1964 Impala. Right and left side supports that the armrest pads mount to.

 A pair of chromed plastic armrest bases with new under pad and covered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

Sewn Headliner using the correct "Star Pattern" embossed vinyl in all colors. With extra sunvisor and rear panel material included. 10 lbs.

Star pattern vinyl installed over new die cut boards with the push outs for the dome light assemblies. Small top edge bead welt bead as original. Sold in pairs. 5 lbs.

We have all the original colors in our exact reproduction "Star" pattern headliner weight vinyl.l. 54" wide. 1 lb per yard.

Reproduced Sunvisors using new boards and support rods. Padded and covered with the  Star pattern vinyl on Hardtops $129.95 in all colors. Completely edge bound. Sold as a pair. 5 lbs.

Reproduced Sunvisors using new boards and support rods. Padded and covered with the 1963 Seville crush grain vinyls on Convertibles $149.95 in all colors. Completely edge bound. Sold as a pair. 5 lbs.

This is a die cut package tray panel board. That fits the rear shelf behind the rear seat back and rear window. And has vinyl covered foam front edge and completely covered with matching interior trim vinyl. Specify model. 6 lbs

This Convertible top fits excellent. Made out of the heavy weight Pinpoint grain vinyl that has heat sealed sides and all vinyl bound edges. Top pads included. Plastic rear window with brass zipper. Available in many colors. Tinted plastic rear window optional. 20 lbs.

This is a Black canvas convertible top storage well. Cut and sewn to duplicate the original and give protection to the top when it is down. We can also make this in your interior color. 3 lbs.

This convertible top boot is designed to match the original. Made out of matching interior vinyl color. Reinforced undersides and foam padded under both sides. Snaps are hidden. 10 lbs.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this models floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.