Seat Cover set, preassembled front and rear upholstered panels with buttons attached, sewn rear armrest covers, windlace set. Star pattern headliner, sunvisors and sail panel vinyl. Vinyl covered kick panels. Extra trim vinyl. Correct 80/20 loop carpet set and a set of matching floor mats. 80 lbs.

* You must send us your upper door & rear trim rails, or purchase ours.

Original Seat Covers for the 1963 Impala (non S/S) using our reproduction Puff fabric with the woven Silver bars, in all colors. Heavy weight crush grain vinyl and woven upper bolster cloth with round stainless buttons attached. 20 lbs.

Front split bench seat cover. Made using heavy weight Seville crush grain vinyl and our excellent 1963 Impala Puff with Silver Mylar seat cloth and upper woven bolster cloth. Upper bolster buttons attached. Pleated front seat back rests. All installation listings are sewn for proper fit. We have all factory colors available. No guarantee on color match to back seat. 13 lbs

For the front bench seat. High density foam shaped to fit to the 1963 2 door seat springs. Excellent low price replacements, which we use for installations in our shop. We feel our layered foam works better than molded foam. 20 lbs per seat foam set.

Universal Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required. 20 lbs. 

Die cut waterproof boards with door edge metal bands and nails. Heat sealed upper block pattern with stainless buttons installed and lower Crushed Ice vinyl or we can install carpeting. Sewn windlace set, rear armrests covers. Vinyl covered kick panels. We can make this in non original color or your choice. No extra charge for White. No door panel stainless included except upper window wipes and lock knob ferrules. 40 lbs.

 We can install your rails or our purchase our reproduction upper rails FREE.

This is a reproduction of the original woven Puff cloth with Silver mylar thread bars. 60 inches wide with heavy latex backing. In all original colors. 3 lbs per yard.

This is the woven upper backrest Bolster cloth where the stainless buttons attach to. Available in all the 1963 interior color. 54 inches wide. Sold by the yard. 2 lbs per yard.

This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1963 colors. Sold by the yard. 3 lbs per yard.

Embossed vinyl that resembles Crushed Ice, for the lower scuff section of the door panels. In all the correct colors, 54 inches wide. 3 lbs per yard.

Correct size round stainless recessed buttons for the door panels and seat backrests. Comes with prong legs and lock retainer clips.   0.5 lb. per 4 buttons.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails 

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame or send your metal support and we will cover it. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

Metal reproduction front door rails that are 100% exact as they were originally. Easy to install by hammering them on to new boards. Stamped metal to the correct curved shape and contour for the upper front doors. Sold in pairs. 5 lbs pair.

 Die cut waterproof boards made for the 1963 Hardtop and Convertible doors. With all holes and slots for stainless trim, armrest mounting and handles. Sold in pairs. 10 lbs.

Metal Reproduction rear quarter trim upper rails, Curved and designed just like the factory ones. Add your trim boards to these rails and install your upholstery. Sold in pairs for the hardtops.

Die cut rear quarter interior boards. Attaches to the upper rails and gets trim vinyl covered. Sold in pairs.

Door Edge Metal Bands for all models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges. $89.00 set. 4 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for for $7.50 with Free Shipping..

This is a die cut package tray panel board. That fits the rear shelf behind the rear seat back and rear window. And has vinyl covered foam front edge and completely covered with matching interior trim vinyl. 6 lbs

These are a pair of die cut heavy boards that are covered with 1963 interior trim vinyl in all the factory colors. Please state if your 1963 has factory air conditioned. 2 lbs.

1962-63-64 Impala front armrest rubber pad and pvc under support. Sold in right and left pairs.  We are the only company that sells them without being vinyl covered. Ready to staple or glue the vinyl onto. And we also sell them vinyl covered. 5 lbs.

These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors.  Ready to install on your plastic armrest bases. 5 lbs.

This is a pair of exactly duplicated chromed plastic armrest bases for 1962 - 1964 Impala. Right and left side supports that the armrest pads mount to.

 A pair of chromed plastic armrest bases with new under pad and covered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

Our embossed Star pattern vinyl material is sewn into the proper shape for the 1962-63-64 Impala 2 door Hardtop. Available in all the correct colors and includes extra sunvisor and rear sail panel headliner material. 10 lbs.

These are a pair of new reproduction 1963 "Star Pattern" Sunvisors. Made with new fiberboards and support rods, padded and covered with the same vinyl as used for the headliner. Sewn on vinyl edge binding and chrome end tips. 5 lbs.

We have all the original 1963 colors, in our exact reproduction "Star" pattern headliner weight vinyl.l. 54" wide. 1 lb per yard.

Star pattern vinyl covering over new die cut boards with the push outs for the dome light assemblies. Small top edge bead welt bead as original. Sold in pairs. 5 lbs.

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

4 pieces of 3/8" round sponge rubber rod that we cover with 1963 Seville grain vinyl. In all the factory colors or your choice of color. These are for the rear of the kick panels and  two pieces that staple to the front of the rear quarter trim.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this models floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.