Includes high quality seat covers with buttons attached. Preassembled door and side panel components. Window felts, lock knob ferrules installed. Windlace set sewn on pillar post boards that are vinyl covered along with Dogleg boards. Star pattern headliner, sunvisors and matching vinyl to cover your sail panels. Vinyl covered kick panels. Extra vinyl. Molded 80/20 carpet set and floor mats.  80 lbs.

* Send us your 4 door rails and 2 rear Dogleg rails or purchase our used set and we will attach them free.

 Exact duplications of the original 1963 Impala front & rear 4 door seat covers. Using heavy weight correct Seville crush grain vinyl, reproduced woven "Puff" seat cloth with silver mylar bars. Upper matching color bolster cloth with correct size stainless buttons attached. All installation listings sewn in the factory locations. Available in all colors. 19 lbs.

Using the correct 1963 heavy weight Seville grain vinyl, upper bolster cloth with stainless bottons attached. Triangle puff seat insert cloth with Silver Mylar bars woven into the fabric. Seat installation listing sewn in all the proper factory areas.

For the front seat cushions and backrests. High density foam contour shaped and covered with 1/2" scrim covered foam.  We have sold many sets and use this same kit on our installations.

 Universal Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required. . 

Picture shows the matching trim vinyl, bolster cloth and our beautiful reproduction of the seat fabric. 1963 Impala woven "Puff" cloth with silver mylar bars. Wide fabric with latex back and avalable in all the factory colors. Sold per yard. 3 lbs per yard. Sample sent.

This is the woven upper backrest Bolster cloth where the stainless buttons attach to. Available in all the 1963 interior color. 54 inches wide. Sold by the yard. 2 lbs per yard.

Correct size round stainless recessed buttons for the door panels and seat backrests. Comes with prong legs and lock retainer clips.  0.5 lb. per 4 buttons.

This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1963 colors. Sold by the yard. 3 lbs per yard.

Embossed vinyl that resembles Crushed Ice, for the lower scuff section of the door panels. In all the correct colors, 54 inches wide. 3 lbs per yard.

These are our reproduced 1963 Impala 4 door preassembled front and rear door panels. New boards with galvanized metal edge bands and nails. Window felts and lock knob ferrules included. Upper long brick heat sealed lines with buttons installed and lower portion "Crushed Ice" vinyl. The sedan package also includes vinyl covered center post cardboards with windlaces attached. All packages include kick panels and extra vinyl. 45 lbs

* Send us your cleaned unpainted 4 upper door panel metal rails, and 2 Dogleg rails we will attach them free. Need rails ? call for availability of used ones and Dogleg rails.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails 

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

These are a pair of used 1963 door panel upper metal rails. You must specify 4 door Hardtop or Sedan as they are different. Sold in pairs $100.00. Rear Dogleg rails also available. Complete 6 rail set is $250.00  Only sold with Preassembled Door panel package. 5 lbs per pair.

4 Door front door panel boards. Die cut waterproof boards that fit great. Replace your warped front door panel boards with our reproductions. 10 lb per  Buy the 4 door board set for $89.95

Die cut waterproof rear door panel boards. Proper shape and configuration. Ready to install door edge metal bands and upholstery on. Sold in pairs. 10 lbs.

12 piece Door Edge Metal Bands for the 1963 4 door models. Shaped to fit the 4 door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panels. $160.00 set. 8 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

This is a die cut package tray panel board. That fits the rear shelf behind the rear seat back and rear window. And has vinyl covered foam front edge and completely covered with matching interior trim vinyl. Specify model.9 lbs

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame or send us your metal support and we will cover it. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

These are a pair of die cut heavy boards that are covered with 1963 interior trim vinyl in all the factory colors. Please state if your 1963 has factory air conditioned. 2 lbs.

1962-63-64 Impala front armrest rubber pad and pvc under support. Sold in right and left pairs.  We are the only company that sells them without being vinyl covered. Ready to staple or glue the vinyl onto. And we also sell them vinyl covered.

1962-1963-1964 Front armrest rubber pad and under pvc mounting support that we vinyl covered. Correct Seville grain vinyl in all the correct colors. Easy to install with two screws.

This is a pair of exactly duplicated chromed plastic armrest bases for 1962 - 1964 Impala. Right and left side supports that the armrest pads mount to.

 A pair of chromed plastic armrest bases with new under pad and covered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

Inner boards with windlace sewn on and outer vinyl covered boards. Extra woven cloth covered 3/8" sponge rod for all the doors in many colors. Attaching clips are $1.25 each.

This is a 4 windlace strip set. 3/8" sponge rod that is covered with correct Seville grain interior vinyl. In all the factory correct colors. For in front of the front door, rear of kick panels and behind the rear door. Staples to the Dogleg cardboards.

This is a a pair of rear 4 door Sedan and 4 door Hardtop Waterproof Dogleg cardboards that attach to upper metal rails. And positioned behind the rear doors, beside the rear seat. Die cut boards that are sold in pairs. Specify model.  4 lbs.

Our embossed Star pattern vinyl material is sewn into the proper shape for the 1962-63-64 Impala 4 door Hardtop and Sedans. Available in all the correct colors and includes extra sunvisor and rear sail panel headliner material. 10 lbs.

These are a pair of new reproduction 1963 "Star Pattern" Sunvisors. Made with new fiberboards and support rods, padded and covered with the same vinyl as used for the headliner. Sewn on vinyl edge binding and chrome end tips. 5 lbs.

Star pattern vinyl installed over new die cut boards with the push outs for the dome light assemblies. Small top edge bead welt bead as original. Sold in pairs. 5 lbs.

We have all the original colors in our exact reproduction "Star" pattern headliner weight vinyl.l. 54" wide. 1 lb per yard.

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this models floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.