Includes deep 1" pleated insert vinyl bench seat cover set as original with buttons attached. Preassembled door and rear quarter trim panels with angled Mylar strips and heat sealed lines. Window felts and lock knob ferrules installed. Sewn armrest and top piston covers. Windlace set, and sunvisors. Extra trim vinyl. Convertible top boot. Molded 80/20 carpet seat with matching floor mats. Other non-original colors available.

Plain heavy weight Seville crush grain vinyl with matching 1" pleated vinyl inserts with latex foam under the heat sealed pleats. Buttons attached. All seat installation listings are sewn in the proper locations for a great fit. 30 lbs.

No cloth inserts at this price, use Regular Impala seat cover pricing.  

We can make these Seat Covers in White at no extra charge.

This is bench seat cover for the 1964 Impala Regular Convertible. Heavy weight correct grain plain and deep 1" pleated vinyl inserts. Sewn from original patterns. Upper backrest buttons attached. Installation listings are attached for easy and proper fit. Available in all colors including White at no extra up charge. There is no guarantee on color match to back seat. 15 lbs.

For the front bench seat, cushion and backrests. High density foam contour shaped and covered with 1/2" scrim covered foam.  This is the same as we use in our shop when installing seat covers. 20 lbs.

Universal Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required. 20 lbs.

This is the seat insert 1" pleated 1964 Seville crush grain vinyl with thick latex foam padded underside 54" wide. Available in all interior colors. 5 lbs per yard.

This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1964 colors. Sold by the yard. 3 lbs per yard.

Correct size round stainless recessed buttons for the door panels and seat backrests. Comes with prong legs and lock retainer clips.  0.5 lb. per 4 buttons.

These are our reproduced 1964 Regular Impala Convertible preassembled door and rear side panel package. Using water resistant die cut door boards with new galavanized edge metal bands with nails. Heat sealed line pattern with angled mylar stripes and stainless buttons, window felts and lock ferrules attached. Lower horizontal pleated sections. Sewn vinyl windlace set, sewn rear armrest and piston covers. Extra vinyl for front armrests. No interior side panel stainless included.  40 lbs.

Send us your 4 upper door rails or purchase our reproductions, and we will install them FREE. 

Exactly reproduced out of metal as they were originally. Easy to install by hammering them on to new boards. Stamped metal to the correct curved shape and contour for the upper front doors. Sold in pairs. 5 lbs pair.

Die cut waterproof boards made for the 1964 Hardtop and Convertible doors. With all holes and slots for stainless trim, armrest mounting and handles. Sold in pairs. 10 lbs.

Door Edge Metal Bands for all models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges. $89.00 set. 4 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

Waterproof die cut convertible quarter panel rear boards. Replace your warped, missing cardboards with these exact fitting pair. 5 lbs.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails.

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

Black rubber armrest pads and mountng supports. This is a pair of Ciadella reproduced correct pads. No other company sells them without the vinyl covering. 5 lbs pair.

Reproduced Sunvisors using new boards and support rods. Padded and covered with the 1964 Seville crush grain vinyls on Convertibles $149.95 in all colors. Completely edge bound. Sold as a pair. 5 lbs.

These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors.

This is a pair of chromed plastic armrest support bases. Sold in pairs, lefts and rights as they are different shapes and configurations. Ours are exact reproductions the originals.

 A pair of new reproduced chromed plastic armrest bases with new vinyl covered pads and supports. In all the 1964 matching interior vinyl colors. Sold in pairs. 10 lbs

These are two strips that staple to the front of the rear quarter trim and armrests. Interior vinyl covered 3/8" sponge rod. In all the correct 1964 colors. 2 lbs.

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame or send us your metal support to cover. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

This Convertible top fits excellent. Made out of the heavy weight Pinpoint grain vinyl that has heat sealed sides and all vinyl bound edges. Top pads included. Plastic rear window with brass zipper. Available in many colors. Tinted plastic rear window optional. 20 lbs.

Black canvas material cut and sewn into the proper shape for the convertible top storage area. Or we can make it to your color vinyl request. 3 lbs.

This convertible top boot is designed to match the original. Made out of matching interior vinyl color. Reinforced undersides and foam padded under both sides. Snaps are hidden. 10 lbs.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this 1964 floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.