All vinyl pleated seat covers (or with Hardtop cloth inserts), 4 Preassembled door panels with buttons, window felts and lock ferrules installed. Center post boards with windlaces sewn on, clips and vinyl post cover panels, vinyl covered Doglegs. Star pattern headliner and sunvisors. Wheelwell covers. Extra vinyl. Molded 80/20 carpet set and 4 floor mats.

*Send us your 4 door rails and 2 Dogleg rails or call for the availability of used rails. And we will install them FREE.

Seat covers made using correct Seville grain vinyl in all the 1964 colors, and also in White or Silver. Deep padded 1" heat sealed pleated seat inserts and upper vinyl bolster section with buttons attached. All seat installation listings are sewn in the correct locations. 30 lbs.

We can also make these seat covers with Impala cloth, as bottom photo, same price as 4 door seat covers.

This is bench seat cover for te 1964 Impala Station Wagon. Heavy weight correct grain plain and deep pleated vinyls, or Impala seat cloth. Sewn from original patterns. Upper backrest buttons attached. Installation listings are attached for easy and proper fit. Available in all colors including White at no extra up charge. We can also use 1964 Impala insert cloth, refer to Hardtop price. 20 lbs.

For the front bench seat. High density foam shaped to fit to the 1964 Station Wagon seat springs. Excellent low price replacements, which we use for installations in our shop. We feel our layered foam works better than molded foam.

 High density foam cut and shaped to the correct shape for the seat cushion and backrest. Covered with 1/2" cloth top layer of foam. Sold per seat.

This is the 1964 9 passenger Station Wagon 3rd Seat cover. As original with the deep heat sealed 1" pleats, upper button panel with stainless buttons attached. 

 This is the seat insert 1" pleated 1964 Seville crush grain vinyl with thick latex foam padded underside 54" wide. Available in all interior colors. 5 lbs per yard.

 This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1964 colors. Sold by the yard. 3 lbs per yard.

Preassembled 4 door panels and trim panels with window felts and lock knob ferrules. Using new water proof die cut boards with galvanized serrated edge metal with nails installed. Covered with correct 64' grain vinyls with angled Mylar strips and lower horizontal pleated section with buttons attached. Windlace that is sewn to the center post boards. Post covers, dog leg boards are vinyl covered, and includes extra vinyl. Wheelwell vinyl covers. 40 lbs.

Send us your 4 upper door rails and 2 rear Dogleg rails and we will attach them Free.

We have some good used upper door rails and Dogleg rails, available only if you purchase our preassembled door and trim panels. Buy all 6 for $250.00 or we will sell separate rails. We will install these FREE and add new window felts and ferrules.

Precision die cut waterproof boards for the 1964 Station Wagon front doors. Prepunched holes for handles, window cranks. Power window switch punch outs. Trim slots for interior stainless. Priced per pair, 10 lbs per 2 boards. Please state if you want front or rear boards. Or buy all 4 boards for $89.95

12 piece Door Edge Metal Bands for all 1964 Station Wagon models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear door panels.  $160.00 set. 8 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

Black rubber armrest pads and mountng supports. This is a pair of Ciadella reproduced correct pads. No other company sells them without the vinyl covering. 5 lbs pair.

These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors.  Ready to install on your plastic armrest bases.

This is a pair of exactly duplicated chromed plastic armrest bases. Right and left side supports that the armrest pads mount to.

 A pair of chromed plastic armrest bases with new under pad andcovered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

Correct size round stainless recessed buttons for door panels and the front and rear seat backrests. Comes with prong legs and lock retainer clips. 0.5 lb. per 4 buttons.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails  0.5 lb

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

Sewn from original patterns to properly fit the 1964 Station Wagons. Using embossed Star pattern vinyl in all the factory colors. Extra sunvisor and post vinyl included. 12 lbs.

These are a pair of new reproduction 1964 "Star Pattern" Sunvisors. Made with new fiberboards and support rods, padded and covered with the same vinyl as used for the headliner. Sewn on vinyl edge binding and chrome end tips. 5 lbs.

We have all the original colors in our exact reproduction "Star" pattern headliner weight vinyl. 54" wide. 1 lb per yard.

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame or send your metal support to cover. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

This set is in two pieces, one attached to the pillar post and has 4 cloth covered windlaces sewn on. The windlace covers the 4 door openings. The outer board is vinyl covered with trim vinyl. 10 lbs.

This is a a pair of rear Station Wagon Dogleg cardboards that attach to upper metal rails. And positioned behind the rear doors, beside the rear seat. Die cut boards that are sold in pairs. 4 lbs.

Cut and sewn 3 separate covers using the matching 1964 interior vinyl. Double needle stitched. Does not include the hard under shells. In all the 1964 colors. 9 lbs.

This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this models floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.

This is the correct 80/20 loop carpet yardage that customers want to cover the rear seat and cargo area floor. This carpet is 72" - 80" wide x 36" yard. 12 lbs yard.