Includes exact as original seat covers with buttons attached, preassembled door and rear trim panels with buttons, window felts and lock knob ferrules installed. Sewn rear armrest covers, windlace set. Star pattern headliner, new sun visors and matching vinyl to cover your sail panels. Extra armrest vinyl. Molded 80/20 carpet set and floor mats. 80 lbs.

*Send us your upper door & quarter rails or purchase ours, installation is free.

Original reproduction 2 door bench seat cover set. Using our reproduced seat cloth (all colors available) and upper Bolster cloth sewn using our heavy weight 1964 Seville crush grain vinyl. Horizontal heat sealed lines on the front seat back panels. Stainless buttons installed into the upper woven Bolster cloth. All installation listing sewn in the proper areas. Satisfaction is assured. 16 lbs.

Front split bench seat cover. Made using heavy weight Seville crush grain vinyl and our excellent 1964 Impala seat cloth and upper woven bolster cloth. Upper bolster buttons attached. Pleated front seat back rests. All installation listings are sewn for proper fit. We have all factory colors available. No guarantee on color match to back seat. 13 lbs

For the front bench seat. Shaped and contour cut and shaped to the proper 2 door hardtop seat. High density foam with 1/2" top layer of net foam. $150.00 per seat.  20 lbs each seat.

High density foam cut and shaped to the correct shape for the seat cushion and backrest. Covered with 1/2" cloth top layer of foam. Sold Per Seat- Ships In 2 Large Boxes.

This is an excellent duplicated reproduction of the seat insert cloth used in 1964 Impala's. Available in all colors in 63" width with latex backing. Sold by the yard. Sample sent. 2 lbs per yard.

This is the upper seat back woven Bolster cloth that the stainless buttons attach to. Exactly reproduced for the 1964 Impala only. Available in all factory colors. Sold by the yard. 2 lbs per yard.

This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1964 colors. Sold by the yard. 3 lbs per yard.

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails  0.5 lb

These are the correct clear plastic lock knob ferrules for all 1961 to 1965's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame or send us your metal support for covering. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

Correct size round stainless recessed buttons for the door panels and seat backrests. Comes with prong legs and lock retainer clips. $1.75 Per Button

These are our reproduced 1964 Regular Impala preassembled door and rear side panel package. Using water resistant die cut door boards with new galavanized edge metal bands with nails. Heat sealed line pattern with angled mylar stripes and stainless buttons, window felts and lock ferrules attached. Lower horizontal pleated sections. Sewn vinyl windlace set, sewn rear armrest and extra vinyl for front armrests. 40 lbs.

Send us your 4 upper door rails or purchase our reproductions, and we will install them FREE. 

Ciadella Interiors reproduced these door rails out of metal as they were originally. Easy to install by hammering them on to new boards. Stamped metal to the correct curved shape and contour for the upper front doors. Sold in pairs. 5 lbs pair.

ONLY AVAILABLE WITH PURCHASE OF CIADELLA DOOR PANELS

 Die cut waterproof boards made for the 1964 Hardtop and Convertible doors. With all holes and slots for  stainless trim, armrest mounting and handles. Sold in pairs. 10 lbs.

Door Edge Metal Bands for all models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges. $89.00 set. 4 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

Correctly shaped and formed metal rear quarter trim panel upper rails that attach to the trim panel boards. Replace your rusty or missing ones with Ciadella reproductions. Sold in pairs.
ONLY Available with the  purchase of Ciadella Interiors Door Panels.

Die cut rear quarter interior boards. Attaches to the upper rails and gets trim vinyl covered. Sold in pairs.

These are two strips that staple to the front of the rear quarter trim and armrests. Interior vinyl covered 3/8" sponge rod. In all the correct 1964 colors. 2 lbs.

Black rubber armrest pads and mountng supports. This is a pair of Ciadella reproduced correct pads. No other company sells them without the vinyl covering. 5 lbs pair.

These are a pair of our reproduction 1962 to 1964 armrest pads and bottom supports that we cover in correct Seville grain vinyl in all of the factory colors.

This is a pair of exactly duplicated chromed plastic armrest bases. Right and left side supports that the armrest pads mount to.

A pair of chromed plastic armrest bases with new under pad andcovered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

Correctly sewn for perfect fit. Made from exact duplicate "Star" pattern embossed vinyl as were installed in all 1964 Impala's. All colors available, and include sunvisor and rear roof panel extra vinyl. 10 lbs.

These are a pair of new reproduction 1964 "Star Pattern" Sunvisors. Made with new fiberboards and support rods, padded and covered with the same vinyl as used for the headliner. Sewn on vinyl edge binding and chrome end tips. 5 lbs.

Star pattern vinyl installed over new die cut boards with the push outs for the dome light assemblies. Small top edge bead welt bead as original. Sold in pairs. 5 lbs.

We have all the original colors in our exact reproduction "Star" pattern headliner weight vinyl.l. 54" wide. 1 lb per yard.

Die cut rear package tray panel board. That fits properly to the rear shelf behind the rear seat back and rear window. And is vinyl covered with matching interior vinyl and vinyl with foam front edge.  6 lbs

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this models floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.