Superior quality seat covers, 4 preassembled door panels with buttons, window felts and lock knob ferrules installed. Center post boards with windlaces and outer vinyl covered panels, rear vinyl covered Dogleg boards. Star Pattern headliner, covered sail panels and matching sunvisors. Armrest vinyl. Molded 80/20 carpet set and floor mats.

*Send us your 4 upper door rails and rear Dogleg rails or call us for availability of good used ones.

This is the original reproduction set of 1964 Impala 4 door Hardtops and Sedan seat covers. Available in all factory colors. Using heavy weight Seville crush grain vinyl, exact reproduced seat insert cloth and upper button panel bolster cloth. Heat sealed horizontal lines on the rear of the front seat back rest. High quality correct duplicate. All stainless buttons installed along with the seat installation listings. 18 lbs.

This is the front split bench seat cover for the 1964 regular Impala. Made with the same quality as our full sets are, using the exact vinyls and seat cloths. Upper bolster panel with stainless buttons attached. Heat sealed line design rear seat back panels. All installation listings are sewn in the factory locations. No guarantee on color match to back seat. 12 lbs

For the front bench seat, cushion and backrests. High density foam contour shaped and covered with 1/2" scrim covered foam.  We have sold many sets and use this same kit on our installations.

Universal Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required.

This is an excellent duplicated reproduction of the seat insert cloth used in 1964 Impala's. Available in all colors in 63" width with latex backing. Sold by the yard. Sample sent. 2 lbs per yard.

This is the upper seat back woven Bolster cloth that the stainless buttons attach to. Exactly reproduced for the 1964 Impala only. Available in all factory colors. Sold by the yard. 2 lbs per yard.

This is the correct Seville crush grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight non-expanded 54" wide vinyl in all 1964 colors. Sold by the yard. 3 lbs per yard.

Correct size round stainless recessed buttons for the door panels and seat backrests. Comes with prong legs and lock retainer clips. 0.5 lb. per 4 buttons.

A pair of round stainless door lock ferrules that are felt lined. Also known as anti rattle bezels. Easy to install by bending the prong legs onto the door panel rails  0.5 lb

These are the correct clear plastic lock knob ferrules for all 1961 to 1964's (all models) Sold in pairs. We also have the 1959 & 1960 Stainless lock knob bezels listed above this listing.  Weight is 0.5 lbs per 2.

 New front & rear preassembled door panels for Hardtop and Sedan models. Correct heat sealed upper line design with angled chrome mylar stripes and lower horizontal pleated lines. New water resistant door boards that are die cut. Galvanized edge metal bands with the nails attached. Stainless buttons, window felts and lock knob ferrules installed. This kit includes center post boards with windlace sewn on and outer vinyl covered boards, extra vinyl to cover armrests. 40 lbs.

Send us your 4 upper door rails and 2 rear Dogleg rails and we will attach them FREE or call for availability of used rails.

Waterproof die cut door boards made for the 1964 Impala 4 door model doors. Pre-punched slots for door stainless door trim, and holes for armrests and handles. Impression push outs for power window switches. Sold in pairs for front or rear doors. 10 lbs per Buy all 4 door boards for $89.95

Good used upper metal door rails and Dogleg rails for the 1964 Chevy 4 Doors. We only sell these to customers that order Preassembled Door Panels. Or if they need separate ones. Buy all 6 rails for $250.00 5 lbs pr.

Door Edge Metal Bands for all 1964 4 door models. Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear doors. $160.00 set. 8 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

Black rubber armrest pads and mountng supports. This is a pair of Ciadella reproduced correct pads. No other company sells them without the vinyl covering. 5 lbs pair.

These are Ciadella reproduced 1962-1964 Impala front armrest pads that are covered with matching Seville grain vinyl in all the original colors.  Ready to install on your plastic armrest bases.

This is a pair of exactly duplicated chromed plastic armrest bases. Right and left side supports that the armrest pads mount to.

 A pair of chromed plastic armrest bases with new under pad andcovered with matching interior vinyl. Exact reproduction of the originals. Sold in pairs. 10 lbs

Reproduction of the original. Seville grain vinyl with foam underlay and heavy ABS support frame or send us your metal support for recovering. This is not a hard plastic cap. Unbolt your old dash from under the dash and bolt this one in it's place. 20 lbs

Inner boards with windlace sewn on and outer vinyl covered boards. Extra woven cloth covered 3/8" sponge rod for all the doors in many colors. Attaching clips are $1.25 each.

This is a 2 windlace strip set. 3/8" sponge rod that is covered with correct Seville grain interior vinyl. In all the factory correct colors. For in front of the front door, rear of kick panels and behind the rear door. Staples to the Dogleg cardboards.

This is a a pair of rear 4 door Sedan and 4 door Hardtop, Waterproof Dogleg cardboards that attach to upper metal rails. And positioned behind the rear doors, beside the rear seat. Die cut boards that are sold in pairs. Specify model. 4 lbs.

Sewn to factory specifications using our reproduced embossed Star pattern vinyl headlining material. Exact as the original headliner with extra headlining vinyl to recover the rear roof side panels and sunvisors. We have all the Star headliner colors for 1964's. 10 lbs.

These are a pair of new reproduction 1964 "Star Pattern" Sunvisors. Made with new fiberboards and support rods, padded and covered with the same vinyl as used for the headliner. Sewn on vinyl edge binding and chrome end tips. 5 lbs.

We have all the original colors in our exact reproduction "Star" pattern headliner weight vinyl.l. 54" wide. 1 lb per yard.

Star pattern vinyl installed over new die cut boards with the push outs for the dome light assemblies. Small top edge bead welt bead as original. Sold in pairs. 5 lbs.

This is a die cut package tray panel board. That fits the rear shelf behind the rear seat back and rear window. And has vinyl covered foam front edge and completely covered with matching interior trim vinyl. Specify model. 9 lbs

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs. Available in many colors @ $50.00 for two. 3 lbs pair.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heel pad. Formed to the contour of this models floor pan.  Available in many colors. 20 lbs.

A set of front and rear 80/20 loop carpet mats. Cut and sewn with nibbed underside for non slipping. All vinyl edge binding. Available in many colors.  9 lbs.