This is a set of 1965 Impala vinyl bench seat covers for front and back seats. Made using our heavy weight Madrid grain vinyl, Deep sewn line pleats with latex foam underside and buttons attached. Correct size vinyl welts. All installation listing sewn in the correct locations. Fit is excellent,  We have installed these covers in our shop. 20 lbs.

This is the front bench seat cover for the standard Impala. An exact duplicate of the original in correct Madrid grain vinyl, size of welt, side and depth of the sewn pleats. Buttons attached. Every color available.

For the 1965 Impala front bench seat, cushion and backrests. High density foam contour shaped and covered with 1/2" scrim covered foam. This is the same as we use in our shop when installing seat covers. 25 lbs.

Universal Rear Seat Foam, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Cut out area if you have the speaker opening. Minor trimming required.

This is the correct Madrid grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight 54" wide vinyl in all 1965 colors. Sold by the yard. 2 lbs per yard.

Complete front doors & rear trim panels with upper rails. Using new waterproof boards, surrounded by metal door bands with nails and serrated inner edges to keep the vinyl tight. Correct color Madrid vinyl with Crushed Ice lower sections. Buttons installed. Rear armrest covers and top piston covers and windlace set. Comes complete with new new window felts & lock ferrules. 30 lbs.

A pair of Bare front door panels with no upper rails, door edge metal bands or window felts and door lock knobs ferrules. 15 lbs. 

Die cut waterproof boards made for the Convertible doors. With all holes and slots for stainless trim, armrest mounting and handles. 10 lbs.

Door Edge Metal Bands; Shaped to fit the door boards, serrated inner edges for holding the trim vinyl tight. For the front doors and rear panel front edges.  5 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

A pair of clear plastic with stainless inner supports.  Known as anti rattle bezels. 0.5 lb

This dash has the correct Madrid grained upper skin, with heavy fiberglass substrate with foam center padding. Choice of color. Ready to install, this is not a top cap. 20 lbs.

This 2 strip windlace set using matching Madrid grain interior vinyl sewn over 3/8" sponger rod. In all colors. 2 lbs.

This is a pair of Seat Belts in all the factory colors. Each is 74" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 for two. 6 lbs per pair.

New Sunvisors for the Convertibles using new boards and support rods. Padded and covered with matching interior Madrid vinyl. Vinyl edge binding with stainless end tips. Ask for Custom colors. 5 lbs.

This Convertible top fits excellent. Made out of the heavy weight Pinpoint grain vinyl that has heat sealed sides and all vinyl bound edges. Top pads included. Plastic rear window with brass zipper. Available in many colors. Tinted plastic rear window available at extra cost. 20 lbs.

Black canvas material cut and sewn into the proper shape for the convertible top storage area. Or we can make it to your color vinyl request. 3 lbs.

This convertible top boot is designed to match the original. Made out of matching interior vinyl color. Reinforced undersides and foam padded under both sides. Hidden snaps attached. Other colors are available. 10 lbs.

Contour molded to fit the 1965 floor pan. 80/20 carpet set with jute padded underside. Vinyl heel pad and binding on the sides. Available in other colors also, please call.