This is for the 1965 Impala 4 door Hardtops and Sedan interiors. Black Madrid vinyl was the only vinyl color interior offered from the factory. But we cut and sew all factory vinyl colors. Stitched to the proper factory configuration with deep sewn pleats and buttons attached. Foam underside with correct size vinyl welts. All installation listing sewn in the correct locations. In all the factory original colors. 20 lbs.

Please call for Impala seat covers with cloth inserts.

This cover is for the front seat of a 1965 Impala 4 door Hardtop or Sedan. Heavy weight correct Madrid grain vinyl, size of welt, side and deep sewn pleats with buttons installed. In all factory colors. 15 lbs.

For the front seat cushion and backrests. High density foam contour shaped and covered with 1/2" scrim covered foam.  We have sold many sets and use this same kit on our installations. 30 lbs.

Universal Rear Seat Foam for the 4 door models, high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required.

This is the correct Madrid grain vinyl. The exact embossing as the factory seat covers, door panels, windlace used. Heavy weight 54" wide vinyl in all 1965 colors. Sold by the yard. 3 lbs per yard.

This is not a hard plastic dash cover. Correct Madrid grain covering with foam underside. With fiberglass mounting support with mounting studs. In all 1965 interior colors. 20 lbs.

Using new waterproof boards, surrounded by metal door bands with nails and serrated inner edges to keep the vinyl and carpet tight. Heat sealed upper vertical pleats with buttons installed. Lower Crushed Ice or matching color carpet attached on the bottoms of the door panels. Windlace set and kick panel carpet. Also included are new window felts and lock ferrules. 45 lbs. You must send us your upper door rails and Dogleg rails for us to install them. 

A pair of die cut waterproof boards made for the 1965 4 door front doors. With all holes and slots for stainless trim, armrest mounting and handles. 10 lbs per pair.

This is a set of door panel surround galvanized edge metals with serrated inner edges to hold the door panel vinyl tight to. For the door board sides and the botton mounting rail. 12 piece set for the front and rear doors. 8 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal edge band in the location needed. And simply crimp. Sold in groups of 10 for $7.50 with Free Shipping..

Round clear plastic with stainless steel inner supports. These are correct for 1965's. Easy to Install with prong legs that bend onto the upper rails. Sold in pairs. 0.5 lb.

This 4 piece windlace set using matching Madrid grain interior vinyl sewn over 3/8" sponge rod. 3 lbs. set.

This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 for two. 3 lbs per pair.

Sewn to fit perfect. Made from our exact reproduced "Star" pattern embossed vinyl as were installed in all 1965 Impala's. All colors available, and include sunvisor and rear roof panel extra vinyl. 10 lbs.

Molded carpet set manufactured out of correct 80/20 loop material in all colors. Jute padded underside and heelpad. Formed to the contour of the 1965 4 door floor pan. 20 lbs.