These can be made using solid leather as they were originally or vinyl. Hand made and we test fitted our seat covers on original 1949 to 1952 seat frames. Using our universal foam kit. Looks and fits excellent. All installation listings are sewn in the correct locations. Seat shell material and sewn front seat rear hard back panel covers.  Priced listed is for vinyl or vinyl and cloth.

This is our universal front seat foam for 1949 to 1952 Convertible. This has been tested in our shop and fill out the seat covers perfectly. High density bottom layer of foam and a softer 1/2 foam top layer. 

This is our contour shaped universal rear seat foam for the Convertible model. Bottom layer is thick high density foam with a softer 1/2" layer of top foam. We have tried and tested this foam and use nothing else on our seat cover installations.

New waterproof cardboards with edge metal support bands with nails attached. Two colors of  trim vinyl on the panels with upper and lower darker color and lighter center panels with horizontal stitching. 4 pieces of sewn vinyl covered windlace for door openings. Sewn rear armrest and top piston covers. Vinyl covered kick panels, vinyl to recover armrests.

Matching interior vinyl covered 1/2" sponge rod in the correct lenghts. Two front windlaces have kick panel channel slide in mounting cords and dash filler flaps. We can make this windlace set in many colors.

Black Textured board die cut to the correct shape for proper fit. Sold in pairs for left and right sides.  We can also vinyl cover these to your interior color.

These are a pair of replacement front plastic bases with stainless trim strips and top pads. Top rubber pads are covered in vinyl. Complete ready to install.

Hand made vinyl sun visors using new boards and metal support rods. Cotton padded and covered with matching interior color vinyl. All edge binding with matching vinyl and stainless end tabs are added. We can make these in many colors.

Waterproof 1/8" thick boards that are die cut for the Convertible front doors. Window crank and door handle holes are push outs.

These are for the rear trim panels, mount above the rear armrests. Die cut waterproof boards with window crank and door handle push outs.

Galvanized U shaped door edge metal bands that surround the door board.  Nail included.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $ 7.50 with Free Shipping..

This is a Nylon Pin Point GM grain heat sealed convertible top. Includes side pads and plastic back window with brass zipper and front windshield edge windlace. Heavy weight vinyl cut from tested and true patterns. Available in many colors.

Black canvas cut and sewn to the proper shape and size for the convertible top storage area.  Ask about your desired color, we'll try to do it if we can.

Made to fit the 1949 to 1952 Chevrolet Convertibles. Interior vinyl cut and sewn to the proper configuration and shape, all edges use the same vinyl binding on all edges.  Under stiffner support under snaps.

This is the tiny loop tight weaved carpet, cut and sewn as the originals were. All vinyl binding on the edges and over the tunnel,  vinyl heel pad. 1/8" latex foam and jute padding underside.

his is a cut and sewn carpet set in tight cut pile carpeting. Jute padded underside. Vinyl edge binding with matching vinyl heel pad. We can also us loop carpet material.

This is a four mat set, we manufacture in our shop Using close weave cut pile or loop carpet with nibbed rubber non slip back. All edges are vinyl bound. Many colors available.