Includes: Seat Covers and side seat shell vinyl, Preassembled Door & Side Panels (Oversize shipping), Perforated Headliner & Sunvisors, Windlace set. Vinyl covered kick panels. Daytona carpet and floor mats. This package has been discounted, no further discount.  128 lbs.

You don't have to send armrest bases & old rubber pads, new ones are installed on to the door panels.

Includes: Seat Covers with sewn pair of side seat shell vinyl covers, Preassembled Door & Side Panels and covered  Dog legs, sewn vinyl center pillar post covers (Oversize Shipping) , Perforated Headliner & Sunvisors, Windlace set. Vinyl covered kick panels. Daytona carpet and floor mats. This package has been discounted.

For All 1956 Bel Air orders, you don't have to send armrest bases & old rubber pads, new ones are installed on to the door panels.

Seat Covers in all the factory colors with correct 1956 embossed Silver welt (Not 57' clear tinsel welts). Sewn using Heavy weight 1956 grain vinyl and our excellent reproduction seat cloth. Including never before offered Charcoal/Yellow & Beige/Green. Embossed Silver buttons to match the seat welt. Extra seat shell vinyl included. 20 lbs.

Correct embossed Silver seat and door panel welts.

This 1956 Bel Air Front Seat cover is for the 2 door or 4 door Hardtop models. Sewn using our correct Haircell grain 56 vinyls and Bark pattern woven Bel Air seat cloth, chrome welt, silver buttons and pleated vinyl behind the seat backs.  Seat shell vinyl included. 12 lbs.

Universal 56 Bel Air front seat foam for 2 door Hardtop models, (Please Specify). Shaped high density foam to the correct configuration and size. One set includes seat bottom cushion and backrest. We feel our layered foam works better than molded foam.  

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights. Please state which side or both when ordering. 10 lbs.

These mounting brackets are used on all 1956 models for mounting the seat shells on. Sold individually in rights or lefts. 1 lb each.

The original 1956 Bel Air Hardtop Bark pattern which has been duplicated in the exact weave. 66" wide. Samples send on request. Priced per yard, 3 yards needed per car. Please specify number of yards in quantity when adding to your shopping cart. 2 lbs per yard.

Interior vinyl as used on seat covers, door panels, seat shells windlace. Heavy weight 54" vinyl in all the factory 1956 colors and Haircell grain. 3 lbs per yard. price per yard

This Silver Mylar welt was used on the the seats and door panels below the armrest vinyl panel. Comes in single or double edged. Sold per foot

Die cut waterproof boards with new door edge metal bands and nails. New front armrest bases and rubber pads are installed and covered with double stitched vinyl armrests covers. Upper and lower pleated vinyl, chrome welt below the armrests. Also includes sewn rear armrests, vinyl covered kick panels, vinyl windlace set, and extra vinyl.  Superior Quality. Oversized Shipping Applies, Two 44 lb boxes.

4 Die cut waterproof boards with new door edge metal bands and nails. New armrest supports and rubber pads included and covered with sewn front and rear armrest covers. Upper and lower pleated vinyl, Also includes sewn center post vinyl covers, rear Dogleg vinyl covered boards, vinyl covered kick panels, vinyl windlace set, and extra vinyl. These door panels are very time comsuming and take days to complete. 44 lbs in for 4 boxes. Oversize Shipping Rates Apply.

8 piece Stainless moldings for the front doors and rear panels. Also includes rear armrest moldings in the 2 dr ht kit. Also pieces sold individually. Please specify which model you have. 10 lbs.

These Silver Mylar covered buttons match the seat welt. Exact pattern as the originals. They are sold individually with tighting retainers. 4 required per 1956 Bel Air.  Free Shipping

1956 Bel Air Models used this Pleated vinyl on the door panels and behind the front seat back rests. We can make it in any of the 1956 colors or a color of your choice. Sold in sheets 27" x 53" with padded back. 5 lbs per 54" wide yard.

Sewn 4 strip set of vinyl covered 1/2" sponge rod in all the correct 1956 colors. Sewn with slide in kick panel cord and dash vinyl flaps. 5 lbs.

These windlace end metal supports are for 1955-1957 2 door hardtops, Nomads and convertibles. They screw on to the upper rear quarter door jamb. Comes with correct black rubber tip ends to attach to your rear windlace strips. Priced per pair. 1 lbs.

This windlace set is made with the upper rear 1/4 panel mounting supports and rubber end stops. For all 1955 - 1957 Convertibles. Sewn with the front kick panel slide in cords and dash flaps. Rears staple on. In all the correct colors for your year. 5 lbs.

These are pre-contoured to the proper 1956 armrest shape as the originals. For the front and rear door panels. Heavy ABS with finger cup pocket. Ready to attach to your new door boards. Sold per pair. 2 lbs.

This is an exact reproduction of armrest rubber pad, even the Black color is correct. Contour shaped and fit excellent on original armrest bases or Ciadella bases. Sold in pairs at this low price of $69.00. 2 lbs.

A pair of correctly contoured cut and sewn on our double needle machine. For the exact shape and appearance of original. Using interior vinyl of your choice. Not for the inexperienced person to install. Rear armrest covers are the same price.

These door panel boards are presicion die cut for the front Hardtop doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. Sold in pairs @ $49.95  10 lbs

Rear quarter side panel boards. With holes pre-punched for stainless trim and armrest mounting holes. $25.00 pair. 5 lbs.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Universal shaped to conform to the Hardtop door panels. 4 lbs.

4 door Hardtop galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Universal shaped to conform to the 4 door hardtop door boards. 8 lbs.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 with Free Shipping.

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup. .05 lb.

These are stamped metal door panel finger cups for the Bel Air front and 4 door rear door panels, with two screw holes. Sold individually. 1 lb.

These black precut strips in the correct lenght and thickness, attach to the inner front and rear of the roof panel. The front, sides and rear of the headliner staples to these strips. Please specify 2 door or 4 door Hardtop. 2 lbs.

Includes 2 long over the sides of the roof, front and rear of the roof above the glass, and tops of rear Doglegs. 3 lbs.

We reproduced all the correct 1956 perforated vinyl headlining materials. In the exact weight, colors, and Haircell grain vinyl. Sewn specifically for the 1956 Bel Air 2 door hardtop. Additional sunvisor vinyl covering included. In many other colors. 8 lbs

New reproduction of the 2 door Hardtop 7 steel wire headliner bows. These hold the headliner in the correct location. Each bow is marked with number. There are holes on the inside of the roof sides.

We reproduced all the correct 1956 perforated vinyl headlining materials. In the exact weight, colors, and Haircell grain vinyl. Sewn specifically for the 1956 Bel Air 4 door hardtop. Additional sunvisor vinyl covering included. In many other colors. 8 lbs

New Sunvisors manufactured using new boards and rods. Padded and covered with Perforated vinyl to match your headliner. Vinyl edge bound and finger tip inserts with chrome tips added. 5 lbs.

This textured panel board comes in Black and has been die cut to properly fit the rear shelf behind the rear seat back and rear window. $29.00  Please specify model.  6 lbs.

These are die cut boards to properly fit the rear package shelf in front of the rear window. We professionally vinyl cover these panels in the proper interior color for each model.

A pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. Priced per pair 3 lbs.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

Low loop Daytona carpeting we started having manufactured in 1980. We have all the correct colors in this beautiful carpet with rubber backing. Comes with correct vinyl binding and heel pad. Double seamed at the top of the hump and at the door opening sides as they did from the factory. And jute padding underside. 20 lbs.

Daytona reproduced low loop, tightly woven nylon carpet material. 54" wide with latex foam underside. Sold 54" x 36" per running yard. 10 lbs per yard.

Front & rear 4 piece set. Laytex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors.  Both sets have nibbed backing. 10 lbs.  FREE with interior purchase.

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set.  20 lbs.

This trunk mat is made using our low loop "Daytona" carpet material that has latex foam backing. Cut to properly fit the trunk floor contour and shape, with or without spare tire cut out opening. Matching interior vinyl edge binding sewn on the outside edges to duplicate the interior floor carpet. 9 lbs.

We cut and completely vinyl bind the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.

Black Rubber Trunk mat. Molded to the shape of your 1956 trunk floor, with lines and cut out for spare tire. 16 lbs.