Includes Seat Covers for 2 door Sedan with seat shell vinyl. Preassembled door panels with armrest bases and new rubber pads installed  (Oversize Shipping). Windlace set, Pillar post boards and rear sail boards. Pleated vinyl Dog Leg boards. Headliner and sunvisors. Vinyl covered kick panels. Daytona carpet set and floor mats.  This interior package has been discounted, no further discount.

Includes original reproduction Seat Covers for the 4 door Sedans with sewn seat shell vinyl covers. Preassembled door panels with armrest bases and rubber pads installed. Windlace set with center pillar board attached, Rear Dog Legs. Headliner and sunvisors. Vinyl covered kick panels. Daytona carpet set and floor mats.  Oversized Shipping Rates Apply on door panels.  Discounted interior package, no further discount.

In all the six factory colors, for 2 door and 4 door Sedans. Sewn using Heavy weight Haircell grain vinyl and our excellent reproduction seat cloth. Correct embossed Silver seat welt and matching buttons included along with extra seat shell covering vinyl. 18 lbs.

An exact duplicate or the original in every way. Sewn using our heavy weight Haircell vinyls and our excellent reproduction Bark pattern seat cloth with filler color threads woven into the fabric. Silver mylar welt and 2 buttons. Available in all the factory colors. Samples sent upon request. 10 lbs

Bel Air 2 door or 4 door front seat foam. (Please Specify Model) Shaped high density foam to the correct configuration and size. One set includes seat bottom cushion and backrest. We feel our layered foam works better than molded foam.  24 lbs. per seat.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights. Please let us know what side or both when ordering. 10 lbs.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

These mounting brackets are used on 1956 models. 2 door, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

The original 1956 Bel Air Sedan 66" wide seat cloth with the Gold threads running through has been duplicated in the exact weave. Samples send on request. Price is per yard, 3 yards needed per car. Please specify number of yards in quantity when adding to your shopping cart. 2 lbs per yard.

Interior vinyl as used on seat covers, door panels, seat shells, sunvisors. Heavy weight 54" vinyl in all the factory 1956 colors and Haircell grain. 3 lbs per yard. price per yard

This is the correct small square embossed Silver Mylar welt was used on the the seats and door panels below the armrest vinyl panel. Comes in single or double edged. Sold per yard

Die cut waterproof boards with new door edge metal bands and nails. New armrest bases and rubber pads included. Attached armrest covers installed, covered with upper pleated vinyl. Also includes vinyl covered kick panels, woven cloth windlace set with slide in kick panel cord and vinyl dash flaps, and extra vinyl.  Rear quarter boards have pleated vinyl in upper section and plain vinyl below. Two boxes weight is 44 lbs each. Oversized Shipping Rates Apply.

No need to send Armrest bases and rubber pads, armrests are covered and mounted to the front door panels.

Die cut waterproof boards with new door edge metal bands and nails. No need to send us your front and 4 door rear armrest bases and rubber pads, they are included. Covered with upper and lower pleated vinyl. Also includes vinyl covered kick panels, Center pillar post boards with cloth windlace attached. Covered rear Doglegs with pleated vinyl.  Additional vinyl.   Weight is 44 lbs in 4 boxes, Oversized Shipping Rates Apply

Stainless interior trim moldings for the front doors and rear panels. Also pieces sold individually. Please specify which model you have. 10 lbs.

These Silver Mylar covered buttons match the seat welt. Exact pattern as the originals. They are sold individually with tighting retainers. 4 required per 1956 Bel Air. Free Shipping

1956 Bel Air Models used this Pleated vinyl on the door panels and behind the front seat back rests. We can make it in any of the 1956 colors or a color of your choice. Sold in sections 27" x 53" wide with padded back. 5 lbs per sheet.

These are pre-contoured to the proper 1956 armrest shape as the originals. For the front and rear door panels. Heavy ABS with finger cup pocket. Ready to attach to your new door boards. Sold per pair. 2 lbs.

This is an exact reproduction of armrest rubber pad, even the Black color is correct. Contour shaped and fit excellent on original armrest bases or Ciadella bases. Sold in pairs at this low price of $69.00. 2 lbs.

A pair of correctly contoured cut and sewn on our double needle machine. For the exact shape and appearance of original. Using interior vinyl of your choice.  Should be installed by a professional with a long arm sewing machine. Rear armrest covers for 4 doors are the same price.

These are a pair of 2 door or 4 door sedan die cut waterproof door boards, please specify model. Punch outs for window cranks and door handles. Just add your edge metal to and add your upholstery trim.

Made to go from the front edge of the quarter post to the wheelwells. Die cut waterproof boards with punch outs for window cranks and armrests. Sold in pairs. 10 lbs.

A pair of waterproof die cut pillar post boards for 2 door models. Attaches with 2 clips to the metal center post. 1 lb.

Properly shaped die cut heavy boards made to install to the Station roof pillar and these would be covered by the headliner vinyl. Sold in pairs. 5 lbs.

 2 required for 2 door Sedans and 14 needed for the 4 door Sedans. Sold individually. 

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup. .05 lb.

These are stamped metal door panel finger cups for the front or rear door panels, with two screw holes. Sold individually.   .05 lb.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the 2 door sedan door panels. Nails included. 4 lbs

4 Door Sedan galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Universal shape for the sedan door panels. Nails included. 8 lbs

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

This kit attaches to the inner roof panel. Black precut strips are for stapling the complete headliner and side pillar headlining. In the factory thickness and lenghts for the specific locations. Please specify model. 2 lbs.

A set of 7 metal headliner installation bows, curved to the proper contours for each specific model. 10 lbs.

Napped cloth headliner; Sewn in the 2 door and 4 door Sedan pattern with all headliner listings for easy installation, with extra napped cloth to cover pillar posts, sail boards and sunvisors.. 10 lbs.

Installation Video -  http://ciadellainteriors.blogspot.com/2011/10/ciadella-headliner.html

A pair of New Sunvisors manufactured using new boards, and rods. Padded and covered with the Napped cloth material to match your headliner. Vinyl edge bound and finger tip inserts with chrome tips added. 5 lbs.

Assist straps that attach to the center pillar post. We make these in our shop in many colors, using matching woven windlace cloth. Covered support vinyl in the same shape as the originals. Sold in pairs.

Woven cloth covered 1/2" sponge rod in all the correct colors. Sewn with slide in kick panel cord and dash vinyl flaps. 5 lbs.

Woven cloth covered 1/2" sponge rod with kick panel slide in cord and vinyl dash flaps. The 4 door set is sewn to center post boards (as picture). 10 lbs.

Cloth covered windlace in many colors is $7.50 per yard, call

These are die cut boards to properly fit the rear package shelf in front of the rear window. We professionally vinyl cover these panels in the proper interior color for each model.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. Priced per pair 3 lbs.

A pair of die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

We started having this low loop carpet manufactured in 1980. We have all the correct colors in this beautiful carpet with rubber backing. Comes with correct vinyl binding and heel pad. Double seamed at the top of the hump and at the door opening sides as they did from the factory. And jute padding underside. 20 lbs.

Specify the model.

Reproduced low loop, tightly woven nylon carpet material. 54" wide with latex foam underside. Sold 54" x 36" per running yard. 10 lbs per yard.

Front & rear 4 piece set. Latex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors.  Mats have nibbed non-slip backing. 10 lbs. 

FREE with interior purchase.

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set.  20 lbs. Specify model.

Black Rubber Trunk mat. Molded to the shape of your 1956 trunk floor, with lines and cut out for spare tire. 16 lbs.

This trunk mat is made using our low loop "Daytona" carpet material that has latex foam backing. Cut to properly fit the trunk floor contour and shape, with or without spare tire cut out opening. Matching interior vinyl edge binding sewn on the outside edges to duplicate the interior floor carpet. 9 lbs.

We cut and completely vinyl bind the edges of this loop carpet to match the interior carpet color. With make these with spare tire cut out or no cut out.  Contoured for the upper shelf of the trunk. 10 lbs