Seat Covers and sewn seat shell covers. Preassembled door panels with armrests installed. Sewn wheelwell covers and wheelwell vinyl covered boards and kick panels. Headliner and sunvisors, cloth windlace set with center cardboard. Covered Dog Legs. Daytona carpet set and floor mats. This interior has been discounted, no further discount.  216 lbs. Oversize Rates Apply

Exact duplicates of the originals. Heavy weight vinyls in the correct grain and colors, combined with our Bark pattern seat cloth. 4 round chrome mylar buttons and seat shell vinyl included. All installation listings are sewn in the factory locations. 18 lbs.  For the Beauville 9 passenger 3rd seat add $250.00

An exact duplicate or the original in every way. Sewn using our heavy weight Haircell vinyls and our excellent reproduction Bark pattern seat cloth with filler color threads woven into the fabric. Includes 2 buttons. Samples sent upon request. 10 lbs.

This kit is high density layered foam in the size and shape to repad each seat. This is the same foam we have used and tested when we install our seat covers. Sold per seat, cushion and backrest. We feel our layered foam works better than molded foam.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

These mounting brackets are used on all Bel Air models. 2 door, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

1956 Bel Air Hardtop and Station Wagon seat insert fabric is a beautiful reproduction of the Bark pattern with woven in color threads. 63 inches wide in all the factory colors. 2 lbs per yard.

Interior vinyl as used on seat covers, door panels, seat shells, sunvisors. Heavy weight 54" vinyl in all the factory 1956 colors and Haircell grain. 3 lbs per yard. price per yard

This pleated vinyl is used on door panels and the rear of the front seat. Sold in sheets 27" x 53" in all correct 1956 colors. 5 lbs per sheet.

Four new preassembled door panels using die cut waterproof boards surrounded with galvanized edge metal bands with nails. New armrest suports and rubber pads covered with sewn armrest covers. Covered with upper pleated vinyl, vinyl covered kick panels, cloth windlace set with center post cardboard and extra for tailgate. Vinyl covered rear dog leg panels and above the wheelwell boards, sewn wheelwell covers and extra vinyl. . Weight for this kit is 88 lbs.   Rear door panels did not have armrests (You couldn't fold the rear seat down with them.) Oversize Shipping Rates Apply

8 stainless steel molding set, made to duplicate the 1956 Bel Air 4 Door Station Wagon in every way. Replace your missing, dented or bent door and rear quarter trim stainless. Installed free with purchase of our door panels. 5 lbs.

Armrest Support Bases; For the Bel Air front doors, molded ABS into the correct shape for the 1956 Station Wagon.  2 lbs.

This is an exact reproduction of armrest rubber pad, even the Black color is correct. Contour shaped and fit excellent on original armrest bases or Ciadella bases. Sold in pairs at this low price of $69.00. 2 lbs.

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup.  .05 lb.

These are stamped metal door panel finger cups for the front door panels, with two screw holes. Price is for one. 1 lb.

These Silver Mylar covered buttons match the seat welt. Exact pattern as the originals. They are sold individually with tighting retainers. 4 required per 1956 Bel Air. Free Shipping.

All 1956 Bel Air Models used this pleated vinyl on the door panels and behind the front seat back rests. We can make it in any of the 1956 colors or a color of your choice. Sold by the running yard 54" wide with padded back. 5 lbs per yard.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

Properly shaped die cut heavy boards made to install to the Station roof pillar and these would be covered by the headliner vinyl. Sold in pairs. 5 lbs.

These are a pair of heavy die cut waterproof boards that attach above the rear wheelwells on all Station Wagon models. Correct exact reproduction. 4 lbs.

These clips hold the center cardboards to the pillar.  14 needed for the 4 doors Station Wagon. Sold individually. 1 lb.

Woven cloth covered 1/2" sponge rod in many colors. Sewn on to a pair of center pillar post boards. And tailgate windlace included. 10 lbs

These 4 door panel boards are presicion die cut for the front and rear doors. Using waterproof boards with armrest openings, door handles & window crank holes.  $89.95

Universal 12 piece galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the door panels. Nails included. 8lbs

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping..

Seat belts with chrome quick release aircraft buckle. Woven color webbing to match the 1954 interior colors. Sold per pair or 2 people set, 68" long. $50.00 pair, 3 lbs.

54" wide low loop, tightly woven Nylon carpet. Latex foam underside. Can be used for cargo area covering. 5 lbs per yard.

Low loop weave reproduced to duplicate the original. Cut and Sewn with latex foam and jute padded underside. Edge binding and heel pad use interior trim vinyl in the correct 1956 colors. 20 lbs.

Cut and sewn (the way the factory made them) using tight nylon loop carpet material. All matching interior edge binding and matching heel pad. Jute padded underside. In many colors. Let us know if you have Bucket seats and we will provide a one piece molded carpet set. 20 lbs.

Daytona Carpet mats cut and vinyl edge bound to match the interior trim and the carpet set. Foam bottom. In all the correct interior colors. 10 lbs.

Mats are FREE with interior purchase.

Sewn using correct grain perforated vinyl in all the 1956 Bel Air colors. Extra sunvisor vinyl included. 11 lbs.

New Sunvisors manufactured using new boards, and rods. Padded and covered with Perforated vinyl material to match your headliner. Vinyl edge bound and chrome tips added. 5 lbs.

These strips attach to the inner roof panel. Black precut strips are for stapling the complete headliner and side pillar headlining. In the factory thickness and lenghts for the specific locations. 2 lbs.

Patterned from a low mileage Station Wagon. Sewn with the French seam (double needle stitches) as the originals were. Avaiable in all the 1956 interior trim colors, or we can make them to your color and material choice. 5 lbs.

Daytona or Replacement loop cargo ($200) area carpet kit in all original colors. Cut 5 piece set for installing under the cargo area stainless trim or we can sew matching interior vinyl binding on for you (call). Samples sent for your viewing. 20 lbs.

Precision cut plywood for cargo area and spare tire cover. Cut outs for shock cover plates. Replace you old rotted warped boards with new. 20 lbs.

33 1/3% discounted. Die cut rear cago decking in 7 colors. 1/2" wide channels (55's were 3/4") This is not interior vinyl that has had channels heat sealed on and glued to ABS. This is the worlds finest replacement. Covers from rear seat to the tailgate. Price has been reduced while supply lasts. ND