Seat covers, preassembled doors with armrest supports and rubber pads. Rear side trim panels, headliner and sunvisors, 6 piece windlace set. Wheelwell covers and vinyl covered above the wheelwell boards and vinyl covered kick panels. Daytona carpet set and floor mats.  140 lbs.

* Included and attached are armrest bases and rubber pads. Oversize shipping on door panels.

This an excellent duplication of the factory Nomad Seat Covers, in fabric, plain and pleated vinyls. Using heavy weight "Haircell" grain vinyls with our reproduced Bel Air seat cloth. Pleated vinyl on rear of the seat backs. All installation listing sewn in the proper areas. 4 Silver mylar buttons included along with seat shell covering vinyl. Available in all 56 Nomad color combinations. 18 lbs.

Made to duplicate the original in every way. Sewn using our heavy weight Haircell vinyls and our excellent reproduction Bark pattern seat cloth with filler color threads woven into the fabric. Includes 2 buttons. Samples sent upon request. 10 lbs.

Nomad front seat foam. Shaped high density foam to the correct configuration and size. One set includes seat bottom cushion and backrest. We feel our layered foam works better than molded foam.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights. Please state which side or both when ordering. 10 lbs.

These mounting brackets are used on 1956 Chevy models, for attaching the seat shells to the seat frame.  Sold individually in rights or lefts. 1 lb each.

This is as close to the original seat insert cloth as you can find. Wide 63" fabric with heavy latex backed. In all factory colors including Beige/Green and Charcoal/Yellow. Please ask or email for samples of cloth and vinyls. 2 lbs. per 60" yard.

1956 Bel Air Models used this Pleated vinyl on the door panels and behind the front seat back rests. We can make it in any of the 1956 colors or a color of your choice. Sold by the sheet 27" x 53" with padded back. 5 lbs per sheet.

Heavy weight non-expanded vinyl in all the factory colors and embossed with the correct "Haircell" grain. 54" wide, sold by the yard. Samples gladly sent. 3 lbs per 54" yard.

These Silver Mylar covered buttons match the seat welt. Exact pattern as the originals. They are sold individually with tighting retainers. 4 required per 1956 Bel Air.  Free Shipping.

Door Panels completely assembled (Less Stainless). New waterproof die cut doors boards with door edge metal bands and nails. Sewn on armrest covers over our armrest bases and rubber pads (Now Included). Upper pleated vinyl, sewn wheelwell covers and plain vinyl. Vinyl covered cardboards for above the wheelwells. Vinyl covered kick panels, sewn windlace for doors & tailgate. Two 45 pound boxes.

A pair of correctly contoured cut and sewn on our double needle machine. For the exact shape and appearance of original. Using interior vinyl of your choice.  Suggest your installer have a long arm sewing machine. 5 lbs.

This exact reproduction is for the front doors, rear quarter trim panels and the lower rear armrest moldings. 8 piece set. 5 lbs.

Free installation with Preassembled door order.

Properly shaped die cut heavy boards made to install to the Station roof pillar and these would be covered by the headliner vinyl. Sold in pairs. 1 lbs.

These are pre-contoured to the proper 1956 armrest shape as the originals. For the front and rear door panels. Heavy ABS with finger cup pocket. Ready to attach to your new door boards. Sold per pair. 2 lbs.

These Black Rubber Pads are manufactured with the proper contour to fit the original metal armrest bases and the Ciadella reproduction armrest bases. These are just like the originals. Sold in pairs and ready to glue on. 2 lbs.

These are stamped metal door panel finger cups for the front door panels, with two screw holes. Sold individually.  0.5 lb.

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup.  .05 lb

These waterproof die cut boards are duplicates of the 1956 Nomad door panel boards. Excellent fit with handle holes and stainless trim slots are pre-punched. Sold in pairs. 10 lbs per pair.

Die cut for the Nomad rear quarter trim area, using heavy waterproof boards. 10 lbs.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the Nomad door panels. 4 lbs.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

These black precut strips attach to the inner roof panel and pillar posts. Made for stapling the complete headliner and side pillar headlining. In the factory thickness and lenghts fot the specific locations. 4 lbs.

Sewn in the Nomad pattern with cardboard strips for the headliner bows slip on installation. Using perforated Haircell grain vinyl in all the 1956 Nomad colors. Extra sunvisor covering material included.  11 lbs.

New reproduction sunvisors that are made using new fiberboard and metal support rod. Padded and perforated vinyl covered, all matching edge vinyl bound with chrome tips. In all 1956 Nomad colors. Sold in pairs. 5 lbs.

These are a pair of heavy die cut waterproof boards that attach above the rear wheelwells on all Station Wagon models. Correct exact reproduction. 4 lbs.

These are patterned from a low mileage Nomad. Sewn with the French seam (double needle) as the originals were. All colors available, or we can make them to your color and material choice. 5 lbs.

Windlace 6 piece set; Covered 1/2" sponge rod using the 1956 interior trim vinyl with dash flaps and the front cord to slide into the kick panel supports. Includes 2 tailgate pieces. 5 lbs.

These windlace end metal supports are for 1955-1957 2 door hardtops, Nomads and convertibles. They screw on to the upper rear quarter door jamb. Comes with correct black rubber tip ends to attach to your rear windlace strips. 1 lbs.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. Priced per pair 3 lbs.

This windlace set is made with the upper rear 1/4 panel mounting supports and rubber end stops. For all 1955 - 1957 Convertibles. Sewn with the front kick panel slide in cords and dash flaps. Rears staple on. In all the correct colors for your year. 5 lbs.

54" wide low loop, tightly woven Nylon carpet. Latex foam underside. Can be used for cargo area covering. 5 lbs per yard.

Pete Ciadella was the first to correctly manufacture the low loop Daytona carpeting in 1980. We have all the correct colors in this beautiful carpet with rubber backing. Comes with correct vinyl binding and heel pad. Double seamed at the top of the hump and at the door opening sides as they did from the factory. And jute padding underside. 20 lbs.

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if your Chevy has Bucket seats and we will sell you a molded one piece carpet. 20 lbs.

Front & rear 4 piece set. Latex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors.  Mats have nibbed backing. 10 lbs. 

FREE with interior purchase.

Precision cut plywood for cargo area and spare tire cover. Cut outs for shock cover plates. Replace you old rotted warped boards with new. 20 lbs.

33 1/3% discounted. Die cut rear cago decking in 7 colors. 1/2" wide channels (55's were 3/4") This is not interior vinyl that has had channels heat sealed on and glued to ABS. This is the worlds finest replacement. Covers from rear seat to the tailgate. Price has been reduced while supply lasts. ND

Daytona and Replacement loop cargo ($200.00) area carpet kit in all original colors. Cut 5 piece set for installing under the cargo area stainless trim or we can sew matching interior vinyl binding on for you (call). Samples sent for your viewing. 20 lbs.