Seat covers, preassembled door and rear trim panels. Sewn rear armrest covers, windlace set, vinyl covered kick panels. Pyramid pattern vinyl Headliner and sunvisors. Extra seat shell and armrest vinyl. Loop carpet set and matching floor mats. This package has been discounted from our retail prices, no further discount applies.  80 lbs

FYI; 1957 Bel Airs never used Gold woven tinsel welt

 Seat covers, preassembled door and rear trim panels. Sewn center post vinyl covers, windlace set, vinyl covered kick panels. Pyramid pattern vinyl Headliner and sunvisors. Sewn seat shell vinyl and armrest vinyl. Loop carpet set and matching floor mats. This interior package has been discounted. 120 lbs

Sewn in the exact original style using correct Cloud pattern weaved Black fabric with colored Cloud filler thread outlines. Heavy weight correct grain and colors of vinyl, Silver tinsel seat welt, Mylar buttons are included. Installation listing as the factory used are sewn in place for proper installation. Seat shell vinyl included.  23 lbs.

Bel Air front seat cover is the same high quality and materials used as our full seat cover set. Our excellent reproduction heavy weight Black seat cloth in all the "Cloud" pattern colors. Silver tinsel welt, 4 Silver buttons make for a beautiful duplicate of the original. 12 lbs.

We can make bucket seat covers in the original design. Using high quality vinyl and seat insert cloth of your choice.  For 1962 to 1966 GM bucket seat frames. Order a front and rear set for Hardtops, Convertibles, Sedans or Wagons.  Let us know year and color you'd like to duplicate.

Front seat foam for 2 door hardtops. Set includes 1 bottom cushion and  2 backrest foam unit per order. High density layered foam shaped to duplicate the originals. We feel our layered foam works better than molded foam.  24 lbs.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Replace your rusty, unusable 2 door front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights.  Please state which side or both when ordering.  10 lbs.

These mounting brackets are used on 1955 to 1957 Chevrolets 2 door, Convertible, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

Please indicate if you need passenger or driver side in the comment section during checkout.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

These Silver Mylar embossed square buttons match the originals. They are sold individually with tighting retainers. 8 required for 1957 Bel Air Hardtops and Nomads. Free Shipping.

Heavy seat insert fabric and thin door panel Cloud pattern cloth; Black with Highlighted Cloud pattern weave. An excellent reproduction of original. 63"

Please specify which weight cloth you want. 2 lbs per yard. Priced per yard

Plain Heavy Weight non-expanded vinyl in the 1957 Grain. In all the 1957 colors, used on the seats, door panels, seat shells, armrests, windlace. 54 inches wide price per yard. 3 lbs per yard.

Preassembled new waterproof door panel boards with edge metal bands with nails installed. Cloud pattern door cloth, matching vinyl center same as the seat vinyl and darker color lower door panel vinyl. Kit includes sewn rear armrest covers, sewn 4 strip vinyl windlace set, vinyl covered kick panels, and armrest covering vinyl. 35 lbs.

Assembled new waterproof door panel boards with edge metal bands with nails installed. Cloud pattern door cloth, matching vinyl center same as the seat vinyl and darker color lower door panel vinyl. Kit includes sewn vinyl center pillar covers, covered rear dogleg panels. Vinyl windlace set, vinyl covered kick panels, and armrest covering vinyl. 25 lbs.  Stainless trim not included but available and installed FREE !

These are a pair of 1957 Bel Air Hardtop, Sedan, Convertible, Nomad, armrest assemblies. Made of plastic In all the 1957 colors with new rubber pads and covered with 57' vinyl top to match the bases. Also used on Bel Air 4 door hardtop rear doors. 5 lbs.

These reproductions of the 1957 Bel Air front armrests bases for Hardtops, Nomads, Sedans, Convertibles and Station Wagons, are excellent. Correct colors. Sold in pairs.

This is the Bel Air front and 4 door Hardtop rear 1957 black armrest rubber pad and bottom metal support base.  Priced per pair. 3 lbs

Armrest metal supports; Attach to the outside of the door panel and screws into the door frame. And the plastic armrest screws onto this plate. Sold in pairs. 2 lbs.

This is the Stainless door and rear quarter panel trim moldings. Also included is the rear armrest lower stainless molding. Any of these 12 piece stainless moldings are also sold individually. Replace your missing, scratched and dented ones. Installed free with purchase of our door panels. 10 lbs.

These door panel boards are presicion die cut for the 2 door or 4 door Hardtop (NO POST) front doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. Sold in pairs 10 lbs per 2 door boards.

Please indicate if your vehicle is a 2 or 4 door.

Die cut rear boards for above the rear armrests with punch out openings for the window crank or power window switch.  5 lbs pr.

These door panel boards are presicion die cut for the front and rear doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. Sold in pairs 20 lbs per 4 door boards.

This galvanized metal set surrounds the door panel board and has serrated teeth inside to hold the trim vinyl tight. 8 piece set for front doors and rear side panel front edges. Nails included. 4 lbs.

This galvanized metal set surrounds the door panel board and has serrated teeth inside to hold the trim vinyl tight. 12 piece set for front and rear doors boards. Nails included. 8 lbs.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

These black precut strips in the correct lenght and thickness, attach to the inner front and rear of the roof panel. The front, sides and rear of the headliner staples to these strips.

Precut strips to the correct lenght and thickness for each specific area. These attach to the interior roof and posts. The headliner staples to these strips all the way around.5 lbs.

New reproduction of the 2 door Hardtop 7 steel wire headliner bows. These hold the headliner in the correct location. Each bow is marked with number. There are holes on the inside of the roof sides.

Sewn using the exact 1957 Pyramid embossed pattern vinyl in all the original colors. In the correct 2 door H.T pattern. Extra sunvisor Pyramid vinyl is included. 8 lbs.

Installation Video - http://ciadellainteriors.blogspot.com/2011/10/ciadella-headliner.html

Sewn using the exact 1957 Pyramid embossed pattern vinyl in all colors. In the correct large 4 door H.T. pattern. Extra sunvisor Pyramid vinyl is included. 8 lbs.

New Sunvisors manufactured using new boards, and rods. Padded and covered with the correct 1957 Pyramid embossed pattern vinyl. Vinyl edge bound and finger tip inserts with chrome tips added. 5 lbs.

Interior vinyl covered 1/2" sponge rod in all the correct colors and correct lenghts. Sewn with slide in kick panel cord and dash vinyl flaps. 5 lbs.

These windlace end metal supports are for 1955-1957 2 door hardtops, Nomads and convertibles. They screw on to the upper rear quarter door jamb. Comes with correct black rubber tip ends to attach to your rear windlace strips. 1 lbs.

This windlace set is made with the upper rear 1/4 panel mounting supports and rubber end stops. For all 1955 - 1957 Convertibles. Sewn with the front kick panel slide in cords and dash flaps. Rears staple on. In all the correct colors for your year. 5 lbs.

This textured panel board comes in Black and has been die cut to properly fit the rear shelf behind the rear seat back and rear window. $29.00 or we can vinyl cover to match your interior trim color $59.95 6 lbs.

Textured board die cut for proper fit. Covered with matching interior trim vinyl of your choice.  6 lbs. 

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. Priced per pair 3 lbs.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Let us know if you have Bucket seats and we will provide a one piece molded carpet set.  20 lbs.

Front & rear 4 piece set. Laytex foam underside, complete vinyl edge binding to match the interior vinyl color. Available in all the Daytona carpet colors.  Mats have nibbed backing. 10 lbs. 

FREE with interior purchase.

Black Rubber Trunk mat. Molded to the shape of your 1957 trunk floor, with lines and cut out for spare tire. 16 lbs.

We cut and completely vinyl bind the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.  20 lbs.