Seat cover set, Preassembled door and rear trim panels. Sewn rear armrests and top piston covers. Sunvisors, windlace set, vinyl covered kick panels, Convertible top boot. Extra seat shell and armrest vinyl. Correct color loop Carpet set and floor mats. 80 lbs.

These 1957 Convertible seat covers are as close to originals as you will find. Correct deep 3" fake stitching on the face of the vinyl, shiney circle pattern vinyl inserts sewn together with matching vinyl seat welt. All the attaching listings are on the proper locations. 8 vinyl covered buttons and seat side shell vinyl included. Your satisfaction is guaranteed. 25 lbs.

Front seat cover for the 1957 Convertible is made using plain and matching heat pressed 3" fake stitched vinyl, circle pattern seat insert vinyl and correct single and double sided welts to make an excellent duplicate of the original. Avaialable in all factory colors, or colors of your choice, with no up charge. Factory style listing sewn in the proper locations. 4 vinyl covered buttons included. Samples gladly sent. 15 lbs

We can make bucket seat covers in the original design. Using the same high quality pleated vinyl and seat insert circled pattern vinyl.  For 1962 to 1966 GM bucket seat frames.  Order a front and rear set for Convertible, Hardtops, Sedans or Wagons.  Let us know what colors you'd like, no extra charge to change trim vinyl.

57 Convertible front seat foam. Shaped high density foam to the correct configuration and size. One set includes seat bottom cushion and backrest. We feel our layered foam works better than molded foam.  24  lbs.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights.  Please state which side or both when ordering.  10 lbs.

This is a new reproduction the two section metal seat springs for bottom cushion and back rest. Shaped and sized to fit properly. 50 lbs.

These mounting brackets are used on all 55-57 models. 2 door, 4 door, Convertible and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

The closest embossing to the original anywhere. We reproduced this in all the 1957 Convertible seat and door panel circle pattern colors with same twill backing as original. 54" wide heavy weight vinyl for the seats and door panels. Samples gladly sent. 3 lbs per yard. price per yard

This heavy weight 1957 non-expanded vinyl has the original embossed grain 54 inches wide in all the correct colors. Used on seats, doors, top boot, windlace and you can also cover your kick panels with it. 3 lbs.
price per yard

This 3" fake stitched seat vinyl has padded underside and is available in all 1957 Convertible interior colors. Correct 1957 grain 54" wide. Samples gladly sent we are proud of this vinyl, email us please. 5 lbs.

New front and rear door panels and trim panels with nails installed. Die cut waterproof boards with new galvanized door edge metal bands. Thin padded undersides. Covered using our circle pattern and plain 57 vinyl. Includes sewn rear armrest and top piston covers, vinyl covered kick panels, Extra armrest vinyl, and vinyl windlace set with slide in kick panel cords. 25 lbs.

Door and rear quarter trim stainless moldings. Also included is the rear armrest lower stainless molding. Any of these 12 piece stainless moldings are also sold individually. Replace your missing, scratched and dented ones. Installed free with purchase of our door panels. 10 lbs.

These are a pair of 1957 Bel Air armrest assemblies. Made of plastic In all the 1957 colors. with new rubber pads and covered with 57' vinyl top to match the bases. Used on all Bel Airs and on 4 door hardtop rear doors. 5 lbs.

These reproductions of the 1957 Bel Air front armrests bases are excellent. Correct colors. Sold in pairs.

This is the front 1957 armrest rubber pad and bottom metal support base. For all Bel Air models. Priced per pair.

Armrest metal supports; Attach to the outside of the door panel and screws into the door frame. And the plastic armrest screws onto this plate. Sold in pairs. 2 lbs.

Front door boards that are die cut using high quality waterproof cardboard panels. Push outs for power windows, window cranks and door handle. Sold in pairs. 10 lbs.

These are precision die cut for the 1957 Convertibles, out of waterproof board. Holes for stainless moldings and push outs for window cranks or power window switches. Sold in pairs. 5 lbs.

This galvanized metal set surrounds the door panel board and has serrated teeth inside to hold the trim vinyl tight. 6 piece set for front doors and rear side panel front edges. Nails included. 4 lbs.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping..

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

New Sun visors manufactured using new boards, and rods. Padded and covered with 1957 interior trin vinyl.  Vinyl edge bound chrome tips added. 5 lbs.

Matching interior vinyl windlace set (4 pieces) made for the 1957 Convertible. Vinyl covered 1/2" round sponge rubber with dash side flaps and easy to install slide in kick panel cord. 3 lbs

These windlace end metal supports are for 1955-1957 2 door hardtops, Nomads and convertibles. They screw on to the upper rear quarter door jamb. Comes with correct black rubber tip ends to attach to your rear windlace strips. 1 lbs.

This windlace set is made with the upper rear 1/4 panel mounting supports and rubber end stops. For all 1955 - 1957 Convertibles. Sewn with the front kick panel slide in cords and dash flaps. Rears staple on. In all the correct colors for your year. 5 lbs.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. Priced per pair 3 lbs.

Tight weaved loop carpet available in many colors. All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available.  Let us know if your Chevy has Bucket seats and we will sell you a molded one piece carpet. 20 lbs.

Front & rear 4 piece set. Non-slip under nibbed backing. Vinyl edge binding to match the interior vinyl color. Available in all the 57' interior carpet colors.  10 lbs. 

FREE with interior purchase.

These convertible tops are manufactured using heavy weight GM Pinpoint vinyl exterior and cloth underside in many colors. All have matching color edge binding. Top pads are included as is the zippered plastic back window. Tinted color plastic rear winow optional. 20 lbs.

Rear convertible top storage well. Cut and sewn to proper contour and shape using heavy weight black canvas. 3 lbs.

Made out of matching interior vinyl with heavy support edge vinyl under snap areas. Vinyl edge binding. In all the original colors or any colors you choose. Chrome snaps included and your upholstery person or yourself can attach them for a perfect fit. 7 lbs

Black Rubber Trunk mat. Molded to the shape of your 1957 Convertible trunk floor, with lines and cut out for spare tire. 16 lbs.

We cut and completely vinyl bind the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.