Exact Seat cover set, preassembled door and rear trim panels. Windlace set, center post cardboards, rear sail boards, vinyl covered kick panels. Napped cloth headliner and sunvisors. Extra seat shell and armrest vinyl. Carpet set and floor mats. 75 lbs

Exact Seat cover set, preassembled door and rear trim panels. Windlace set, center post cardboards, rear sail boards, vinyl covered kick panels. Napped cloth headliner and sunvisors. Extra seat shell and armrest vinyl. Carpet set and floor mats. 75 lbs

These 210 seat covers are manufactured using heavy weight 57' plain vinyl and the 3/4" fake stitched pattern vinyl. Along with our reproduced 210 seat fabric in Blue, Green and Charcoal oblong pattern with Gold thread hash marks. All installation listings in the correct locations. Extra seat shell vinyl included. 18 lbs.

This front seat cover is for all 210 2 door and 4 door models. Made using heavy weight 1957 plain Floridian grain vinyls and our exact embossed 210 fake stitched vinyl. Sewn together with our reproduced 210 seat cloth in the oblong pattern with Gold bars. All installation lists are sewn in the factory areas for a great fit. 10 lbs.

210 Hardtops and Sedans used a fabric with oblong pattern with Gold thread bars . Heavy weight in the 3 original colors of Charcoal, Green and Blue. Latex backing. price per yard. 2 lbs per yard.

This is the fake stitched vinyl that is used on 210 seats. Heavy Weight 1957 Grain Vinyl with embossed as original pattern. Sold by 22 1/2" x 33" wide piece. 3 lbs each section.

Plain non-expanded vinyl; 54' wide in all of the 57' 210 colors and with the correct embossed grain. $39.00 yard 3 lbs per yard.

This kit is high density two layered foam in the size and shapes to repad each seat. This is the same foam we have used and tested when we install our seat covers. We feel our layered foam works better than molded foam. Sold per seat, cushion and backrest. 

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required.  .

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights.  Please state which side or both when ordering.  10 lbs.

These mounting brackets are used on all model Chevrolets 2 door, Convertible, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

New door boards or rear panels with shaped door edge metal bands and nails installed. Same pattern cloth and plain vinyls as on the seats and Honeycomb vinyl upper sections. Sewn windlace set for the door openings, vinyl covered kick panels and extra vinyl.  24 lbs.

New door boards or rear panels with shaped door edge metal bands and nails installed. Same pattern cloth and plain vinyls as on the seats. Sewn windlace set for all door openings, vinyl colored kick panels. 4 door hardtops get vinyl covered center pillar covers. 34 lbs.

This is an 8 molding set for the door panels or rear quarter trim panels.

An exact reproduction of the 210 model armrests. Complete with plastic base, rubber pad with vinyl covering. Available in Black or Beige. Sold in pairs. 2 lbs pr.

Die cut boards fit on upper section of the center post. Gets covered with headliner cloth. Sold in pairs. 1 lbs.

Waterproof die cut pillar post cardboards. Attaches with clips listed below to the metal center post. 14 clips required. 

These door panel boards are precision die cut for the front or rear doors. Using waterproof boards with armrest openings, door handles & window crank holes, priced per pair.  10 lbs.

We have the door boards for the RARE 1957 210 2 door & 4 door Hardtops. Weight is 10 lbs for 1 pair.

Waterproof die cut to correct shape and size for the rear side panels on 2 door Sedans. Push outs for window cranks. 10 lbs.

Die cut 2 door hardtop rear quarter trim panel boards with holes for stainless trim, window cranks or punch outs for power window switches. Sold in pairs. 5 lbs.

Rear quarter side panel boards on 4 doors. With holes pre-punched for stainless trim and armrest mounting holes. $20.00 pair. 2 lbs.

These clips hold the cardboards to the pillar. 2 required for 2 doors and 14 needed for 4 doors. Sold individually. 0.5 lb.

This galvanized metal set surrounds the door panel board and has serrated teeth inside to hold the trim vinyl tight. 8 piece set for front doors and rear side panel front edges. Nails included. 4 lbs.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the sedan door panels. Nails included. 8lbs

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping..

These attach to the inner roof panel. Black precut strips are for stapling the complete headliner and side pillar headlining. In the factory thickness and lenghts for the specific locations. Specify model. 2 lbs.

A set of 7 metal headliner installation bows, curved to the proper contours for each specific model. Holds the headliner up in the correct location. 10 lbs.

New reproduction of the 2 door Hardtop 7 steel wire headliner bows. These hold the headliner in the correct location. Each bow is marked with number. There are holes on the inside of the roof sides.

Sewn headliner using Napped cloth or Dobby (Stitched) cloth in many colors. Or in the original colors of Gray, Light Blue or Light Green with extra cloth for sunvisors, center posts and rear sail boards. 8 lbs.

Installation Video -http://ciadellainteriors.blogspot.com/2011/10/ciadella-headliner.html

New Sunvisors manufactured using new boards, and rods. Padded and covered with the Napped cloth material to match your headliner. Vinyl edge bound and finger tip inserts with chrome tips added. 5 lbs.

Sewn using correct color woven cloth covering the round 1/2" sponge rubber rod. With slide in kick panel cord and dash area vinyl flap. 5 lbs

Cloth windlace is $7.50 yard

Sewn using correct color woven cloth covering the round 1/2" sponge rubber rod. With slide in kick panel cord and dash area vinyl flap. Center pillar post cardboards attached. (as pictured) 10 lbs.

This textured panel board comes in Black and has been die cut to properly fit the rear shelf behind the rear seat back and rear window. $29.00  6 lbs

Textured board die cut for proper fit, professionally covered with matching interior trim vinyl of your choice.  6 lbs. 

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. priced per pair. 3 lbs.

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair. 2 lbs.

1957 Chevrolet replacement carpet sets available for this 210 model. In loop carpeting materials, in many colors. Cut and sewn to the contour of your floor with vinyl heel pad and binding. Jute padded underside.  Let us know if your Chevy has Bucket seats and we will sell you a molded one piece carpet.  20 lbs.

Tight weaved loop carpet, edge bound with matching interior color vinyl. Nibbed non slipset backing. In all the 1957 210 colors. 4 mat set. 10 lbs

Free with complete interior order.

This Black textured grain rubber floor covering is molded to the front and rear floor contour.  A must for all restored 1957 210 models. 28 lbs.

Trunk compartment dress up kit is made using 1/8" smooth precision die cut panel boards (not cardboards) for the trunk sides, back panel and floor. No spare tire opening. Customize to your liking. 31 lbs.

1957 Chevrolet Rubber Trunk Mats are an exact duplicate of the originals, with molded contour and vertical lines. With spare tire cut out. Fits all 1957 models. 16 lbs. 

We cut and completely vinyl bind the edges to match the carpet color. With cut out or no cut out for the spare tire opening.  Contoured for the upper shelf of the trunk.