For 2 and and 4 door Station Wagons. Seat covers with the correct Inca pattern vinyl and plain seat shell vinyl, preassembled door and rear side panels as original, extra armrest vinyl, windlace set with center post boards. Vinyl chain pattern headliner and sunvisors. Wheelwell covers and vinyl covered upper boards, and kick panels. Matching interior color loop carpet set and floor mats.  60 lbs.

For 2 and and 4 door Station Wagons. Seat covers and seat shell vinyl, preassembled door and rear side panels, windlace set and center post boards. Vinyl headliner and sunvisors. Wheelwell covers and vinyl covered upper boards and kick panels. Carpet set and floor mats. Extra vinyl for armrests. 80 lbs.

For the 2 door and 4 door 210 6 passenger Station Wagons. Heavy weight 57' vinyl in all the correct colors in plain and 3/4" Fake Stitched as originals were. Exact reproduced Inca embossed pattern seat vinyl in all three colors. All installation listings. Extra seat shell vinyl included. 18 lbs

For the 4 door 210 9 passenger Station Wagons. Three rows of seats. Heavy weight 57' vinyl in all the correct colors in plain and 3/4" Fake Stitched as originals were. Exact reproduced Inca embossed pattern seat vinyl in all three colors. All installation listings. Extra seat shell vinyl included.  25 lbs

This kit is high density layered foam in the size and shape to repad each 210 2 Door or 4 Door Station Wagon seat. This is the same foam we have used and tested when we install our seat covers. We feel our layered foam works better than molded foam. Sold per seat, cushion and backrest. 

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Inca Pattern Seat and Door Panel Embossed Vinyl; Made from the original embossing roller. 54" wide in all 3 1957 210 Station Wagon colors. Just like NOS, it's that perfect. price per yard. Sample sent upon request. 3 lbs per yard.

This is the fake stitched vinyl that is used on 210 seats. Heavy Weight 1957 Grain Vinyl with embossed as original pattern. Sold by 22 1/2" x 33" wide piece. 3 lbs each section.

We stock all the 1957 original grain vinyl in all the correct colors. Heavy weight 54" wide non expanded vinyl. price per yard. 3 lbs per yard.

Replace your rusty, unusable front seat backrest springs with this new reproduction unit. Easy to install. Sold in lefts or rights.  Please state which side or both when ordering.  10 lbs.

These mounting brackets are used on 1955 to 1957 Chevrolets 2 door, Convertible, 4 door and Station Wagon seats. Sold individually in rights or lefts. 1 lb each.

Seat shell stainless steel trim strips. Installation prongs are on the underside and easy to attach. Used on 2 door and 4 door models. Sold individually. 0.5 each.

Preassembled 1957 210 Station Wagon Doors and or Rear Panels for the 2 door or 4 doors. New waterproof die cut boards with galvanized metal edge bands and attached nails. Using both the Inca pattern vinyl in any of the 3 original colors of plain vinyls. Also included are above the wheelwell vinyl covered boards, vinyl covered Kick panels, armrest vinyl. Door and tailgate Windlace set. 45 lbs

Preassembled 1957 210 Station Wagon Doors and or Rear Panels for the 2 door or 4 doors. New waterproof die cut boards with galvanized metal edge bands and attached nails. Using both the Inca pattern vinyl in any of the 3 original colors of plain vinyls. Also included center pillar post boards with cloth windlace attached, tailgate windlace, wheelwell covers and above the wheelwell vinyl covered boards, vinyl covered kick panels, armrest vinyl. 45 lbs

Armrest assemblies for the 1957 210's; New complete plastic bases with rubber pad and vinyl covered tops. In Black or Beige, $75.00 pair. 2 lbs per pr.

These door panel boards are presicion die cut for the front and rear doors. Using waterproof boards with armrest openings, door handles & window crank holes and trim attaching slots. Sold in pairs  10 lbs per 2 door boards.

These die cut boards are for the rear side panels of a 1957 210 2 door Station Wagon, Holes where they are required for trim. 10 lbs. pr.

Properly shaped die cut heavy boards made to install to the Station roof pillar and these would be covered by the headliner vinyl. Sold in pairs. 5 lbs.

These clips hold the cardboards to the pillar. 2 required for 2 doors and 14 needed for 4 doors. Sold individually. 1 lb.

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the sedan door panels. Nails included. 4 lbs

Galvanized metal edge bands that secure on to the door boards. With outside edge serrated edges and door mounting support for the bottom. Shaped to conform to the sedan door panels. Nails included. 8 lbs

8 piece set. Exact reproductions of the originals. Easy to install. Separate moldings available, call or email.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping..

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair 2 lbs.

These black precut strips are for stapling the complete headliner and windlace to the rood panel and center pillar posts properly in the factory locations. Correct thickness and lenghts of strips. 2 lbs.

Sewn with all bow listing attached, in the original pattern for the 210 Station Wagons. Ciadella Interiors reproduced the correct original small Chain embossed vinyl. Original color was Ivory, Light Green or Beige for this 210 SW headliner, but we also have all the Bel Air colors. Extra sunvisor and post headliner vinyl included. 12 lbs.

In the Ivory small Chain link embossed vinyl pattern as it was originaaly for the 1957 210 Station Wagon.. Made using new boards and rods. Edge vinyl binding and chrome tips. Ready to screw on. 5 lbs.

These are a pair of heavy die cut waterproof boards that attach above the rear wheelwells on all Station Wagon models. Correct exact reproduction. 4 lbs.

These are patterned from a low mileage Station. Sewn with the French seam (double needle) as the originals were. Avaiable in all the 1957 210 interior trim colors, or we can make them to your color and material choice. 5 lbs.

Sewn using correct color woven cloth covering the round 1/2" sponge rubber rod. With slide in kick panel cord and dash area vinyl flap. 5 lbs

Cloth windlace is $7.50 yard

Sewn using correct color woven cloth covering the round 1/2" sponge rubber rod. With slide in kick panel cord and dash area vinyl flap. Center pillar post cardboards attached. (as pictured) 10 lbs.

These are a pair of matching seat belts for the driver and passenger, with chrome aircraft chrome quick release buckels. 68" in length, In many colors. priced per pair. 3 lbs.

Tight weaved loop carpet, edge bound with matching interior color vinyl. Nibbed non slipset backing. In all the 1957 210 colors. 4 mat set. 10 lbs

Free with complete interior order.

This is a die cut cargo area replacement carpet kit to match the floor carpet set. This 5 piece seat includes backs of rear seats, cargo area floor, spare tire lid and tailgate. 20 lbs.

This Black textured grain rubber floor covering is molded to the front and rear floor contour.  A must for all restored 1957 210 models. 28 lbs.

For all 1955-1957 Station Wagon; Cargo area wood decking with shock cut outs and spare tire lid tabs. Four 1/2" thick plywood sections. Replace your rotted, warped wood with this premium wood. 20 lbs.

33 1/3% discounted. Die cut rear cago decking in 7 colors. 1/2" wide channels (55's were 3/4") This is not interior vinyl that has had channels heat sealed on and glued to ABS. This is the worlds finest replacement. Covers from rear seat to the tailgate. Price has been reduced while supply lasts. ND  Ciadella Cargo Area Decking is the best available now in all the factory colors. No dying required. Dye cut sections for seats, cargo area, spare tire cover and tailgate. Correct size width of channels and thickness. 20 lbs.