Includes; Seat cover set, 4 preassembled door panels, covered center pillar board and rear Dogleg board. Windlace set. Original Sequin vinyl headliner and sunvisors. Extra Seville grain vinyl. Vinyl covered kick panels. Tuxedo carpet set and matching floor mats. 70 lbs.

Outstanding duplicate of the originals. Sewn using heavy weight original Seville grain vinyl with the vertical chrome mylar strips heat sealed on the back rests. Inserted with our exact reproduction 1959 Impala seat cloth, and correct welt. All installation listings attached. 20 lbs.

This kit is high density layered foam in the size and shape to repad the front seat. This is the same foam we have used and tested when we install our seat covers in our shop. 

Sold per seat, cushion and backrest. Specify model.  20 lbs. O.S.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

Heavy weight non expanded Seville crush grain vinyl as used in 1959 -1964 Chevrolets. Manufactured in all of factory colors, 54" wide. Samples sent on request. 3 lbs per yard.

This is computer designed reproduction from the original multi colored block pattern seat fabric. We had the seat cloth manufactured in all of the colors, 63" wide with latex backing. Samples sent on request. 2 lbs per yard.

Preassemblied front and rear door panels, using the correct two colors of interior vinyls on new boards with edge metal and nails attached. Vertical upper and lower horizontal chrome mylar strips, center door panel imprinted scallop design vinyl and lower heat sealed design and lines. Door wipes and lock ferrules included. Vinyl covered die cut kick panels, and vinyl covered center post boards with windlace attached. Rear Dog leg rails and boards vinyl covered. Extra vinyl for armrests. Weight is 45 lbs

Send us your 4 cleaned upper door rails and 2 rear dogleg rails or call for availability of used ones and we will install them FREE.

This is the 1957 Bel Air armrest assembly we reproduced in many colors. Complete with plastic base, vinyl covered rubber pads, ready to mount. Next picture is the 1962-64 Impala. Both look good on 1959 Impalas. Call please. 5 lbs pair.

We have some very good used original metal upper door rails for 4 door Sedans and Hardtops. (You must specify as they are different.)  These are not sold unless you need them for Preassembled door panel assembly. We install them free. Sold in pairs or the 6 rail set $250.00

These die cut waterproof boards are available for 4 door front door panels. All door handle and window crank holes are pre-punched. Power window switch push outs are marked. Sold in pairs for front.

Buy a 4 door boards set for $89.95 10 lbs per pair.

Made specifically for the 1959 4 door Hardtops and Sedans. Die cut waterproof boards for the rear doors. All door handle and window crank holes are pre-punched. Power window switch push outs are marked. Sold in pairs. 10 lbs per pair.

1959 4 door contour shaped Galvanized metal with embossed teeth for holding the vinyl tight. Installation nails included. 12 piece set. 8 lbs.

These are excellent replacements to replace broken or missing door panel edge metal installation nails. Easy to install by placing between the door board and the metal adge band in the location needed. And simply crimp. Sold in groups of 10 for for $7.50 with Free Shipping..

A pair of anti rattle lock knob ferrules. Round stainless top with inner felt. Easy to install, by bending the tabs on to the upper rails. Sold in pairs.  0.5 lb

Can be installed on all models. Complete with foamed under support. Covered with Seville grain vinyl as the originals were. Ready to glue onto the metal dash. In all the 1959 colors. This is not a hard plastic dash top cap. 20 lbs.

Never before offered in reproduction the 1959 Impala Sequin Headliner! Another Ciadella 1st. We had the Sequin vinyl headlining made in all the correct 59' colors. Headliner sewn in the proper configuration for this 1959 Impala 4 door models. At the low price that is listed. Order yours now this will be a short run, if you want the only correct headliner for your 1959. 10 lbs    

New reproduction sunvisors made in the shape of the original 1959's. Using new fiberboards padded and covered with 1959 Impala Sequin vinyl. Matching vinyl edge binding with chrome end tips. Sold in pairs. 5 lbs

 Inner boards with windlace sewn on and outer vinyl covered boards. Windlace yardage for all doors. Woven cloth covered 3/8" sponge rod in many colors. Attaching clips included.

Cloth windlace is $7.50 yard

Post attaching clips are $1.25 each

This is a 4 windlace strip set. 3/8" sponge rod that is covered with correct Seville grain interior vinyl. In all the factory correct colors. For in front of the front door, rear of kick panels and behind the rear door. Staples to the Dogleg cardboards. 3 lbs.

This is a a pair of the 4 door Sedan and Hardtop cardboards that attach to upper metal rails. And positioned behind the rear doors, beside the rear seat. Die cut boards that are sold in pairs. Specify model. 4 lbs.

This is a pair of Seat Belts in all the factory colors. Each is 68" in length with aircraft style chrome quick release buckels. This pair is for driver and passenger, rear seat belts also sold in pairs @ $50.00 for two.. 3 lbs pair.

This is our vinyl covered panel board for the rear package shelf. Die cut to properly fit the rear shelf behind the rear seat back and rear window. All vinyl covered including the vinyl covered front edge to match your interior color. Specify Hardtop or Sedan. 6 lbs

These are a pair of die cut heavy boards we professionally cover with interior vinyl. Sold in pairs for $59.95

This is solid color 80/20 loop carpet set ( Not the Tuxedo)  These are molded carpet sets in many colors that have jute underlay. Vinyl edge binding and plastic ribbed heel pad. Fit is good and will need trimming of excess carpet material.

This item has additional shipping charges due to heavy weight or oversize dimensions.

This is a molded carpet set for the 1959 Chevy's. Pressure and heat molded to the contour of the floor pan. Jute padded underside, vinyl heelpad. Covers front and rear areas, Some trimming required of excess carpet material. Should be gluded to floor for better fit. 

This item has additional shipping charges due to heavy weight or oversize dimensions.

A 4 mat Tuxedo mat set for front & rear. Contour shaped for proper fit. Nibbed underside for non sliding. Matching vinyl edge binding. Plain loop carpet mats are $85.00  10 lbs.