Includes seat covers, preassembled doors and rear side panels, sewn front and rear armrest covers, windlace set. Vinyl headliner and sunvisors. Vinyl covered kick panels. Extra vinyl and Daytona carpet set and floor mats. 80 lbs.

Made using our reproduction square dot pattern seat fabric that is exactly like the original in all 1954 factory colors. Correct heavy weight Haircell grain vinyl for seat trim and welts. Seat shell vinyl is included. 20 lbs.

Front seat cover for the 1954 Bel Air Hardtop uses correct grains and colors of vinyl combinbined with our exact reproduction square dot seat insert cloth. Heavy gray factory duplicated listings attached for easy installation and tight fit. 12 lbs.

For front or rear seat. This kit is high density layered foam in the size and shape to repad each seat. This is the same foam we have used and tested when we install our seat covers. We feel our layered foam works better than molded foam. Sold per seat, cushion and backrest.  24 lbs per seat oversize shipping.

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

 This was duplicated exactly like the original Block design with white dots. 60" wide with latex support backing. Available in all of the factory original colors, please email us for samples. 2 lbs per yard.

This is matching color and grain for the 1954 Bel Air Hardtop. Heavy weight 54" vinyl, used on door panels and seats. Samples upon request. 3 lbs per yard.

Front doors and rear quarter trim panels. Die cut water resistant boards with galvanized steel bands with nails attached. Covered with correct vinyls in two colors. Heavy saddle stitched horizontal lines sewn on. Sewn front and rear armrest covers, windlace set, vinyl covered kick panels. 35 lbs

New Armrest assemblies and rubber pads, vinyl armrests are covered and attached to the door panels. $1000.00 Please call to order.

Front pair of armrest metal supports with the armrest bases attached. Installs the same way the factory did them, by bending the tabs into the door boards. Rubber pads are extra. 8 lbs.

Front armrest bases that attach to the door boards. For both doors consists of ABS plastic contour shaped to duplicate the 1954 armrest base. Easy to install on the door boards by riveting. 2 lbs.

This is an exact reproduction of armrest rubber pad, even the Black color is correct. Contour shaped and fit excellent on original armrest bases or Ciadella bases. Sold in pairs. 2 lbs.

Cut and sewn using correct trim vinyl and double needle stitched. Please state if you want front or rear armrest covers. In all the factory colors. These get wrapped and glued around the metal bases and rubber pads.

Die cut waterproof door panel boards made specifically for the 1954 Bel Air 2 door Hardtop. Holes for interior trim and armrests pre-punched or slotted. 10 lbs.

Galvanized door edge metal support bands with serrated back edges to hold the trim vinyl tight. Nails included. For front doors and rear quarter panel boards front edges. 4 lbs.

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

These are stamped metal door panel finger cups for the front door panels, with two screw holes. Sold individually.  0.5 lb.

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup.  .05 lb

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair 2 lbs.

This textured panel board comes in Black and has been die cut to properly fit the rear shelf behind the rear seat back and rear window. $29.00 or we can vinyl cover to match your interior trim color $59.95 6 lbs.

Vinyl headliner that is cut and sewn from original pattern. Cardboard slide in supports for the chrome headliner bows. Extra sunvisor material is included. 11 lbs.

Sunvisor fiberboard and support rod. This is for the upholstery shop trim man that wants to do his own or the do it your selfer that is handy and can sew. $50.00 pair 4 lbs.

Made using new boards and support rods. Padded and covered to match the headliner vinyl material in grain and color. Chromed end tips attached. 5 lbs.

4 piece set of matching interior vinyl covered 1/2" sponge rod. Ready to install with slide in kick panel cords and dash flaps. In all original colors or any color you would like. 3 lbs.

Aircraft style seat belts with chrome quick release buckle. Woven color webbing to match the 1954 interior colors. Sold per pair or 2 people set, 68" long. $50.00 pair 3 lbs. per pair.

A pair of black rubber end tips to add to the ends of your rear quarter windlace set. Excellent reproductions of the oiginals. Replace your missing or damaged end tips or add them if your windlace set didn't come with them. 0.5 lb

Reproduced low loop, tightly woven nylon carpet material. 54" wide with latex foam underside. Sold 54" x 36" per running yard. 10 lbs per yard.

This was reproduced to duplicate the original low loop material known as "Daytona" carpet. All matching interior color edge binding and heel pad. Foam laminated underside and jute padded. In many colors. 20 lbs.

Daytona Carpet mats cut and vinyl edge bound to match the interior trim and the carpet set. Foam bottom. In all the correct interior colors. Replacement tight weaved nibbed backed carpet mats are $85.00 set. 10 lbs.

Mats are FREE with interior purchase.

Replacement tight loop carpet cut and sewn to fit great. Vinyl binding on the edges and nibbed non slip backing.

Free with interior purchase.

All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available. Please let us know when ordering if you car has bucket seats.  20 lbs.

Black rubber molded mat with spare tire and gas tank neck cut outs. Molded vertical lines, exactly like the original. 16 lbs.