Choose your Chevy below, to view kits, materials and parts for your vehicle:

 
1954 Chevrolet Bel Air Convertible
 
1954 Bel Air Convertible Interior Kit.

 

 

Includes seat cover set, preassembled doors and rear side panels. Sewn front and rear armrest covers, top piston covers, windlace set. Sunvisors, Convertible top boot. Daytona carpet set and floor mats. Vinyl covered kick panels and extra vinyl.

$2175.00
Qty.

 
1954 Bel Air Convertible Seat Cover Set.

 

This seat cover set is made just like the originals in colors and grains of vinyls. Sewn with thick saddle stitched White thread onto the foam padded insert vinyl. Sewn using 1954 trim vinyl and welt edges, sewn on installation listings in their proper locations, Extra seat shell vinyl is included. 22 lbs.

$695.00
Qty.

 
1954 Bel Air Convertible Front Seat Foam.

 

1954 Convertible Front Seat Foam. This kit is high density layered foam in the size and shape to repad each seat. This is the same foam we have used and tested when we install our seat covers.We feel our layered foam works better than molded foam.  Sold per seat, cushion and backrest.

$200.00
Qty.

 
1954 Convertible Rear Seat Foam.

 

Rear bench seat seat high density foam with 1/2" foam top layer. This is what we use in our installation department and we do not have to add any other foam or batting. Minor trimming required. 

$200.00
Qty.

 
1954 Bel Air Plain Interior Vinyl.

 

 

Interior vinyl as used on seat covers, door panels, windlace, top boot, seat shells, sunvisors. Heavy weight 54" vinyl in all the factory 1954 colors and Haircell grain. Samples upon request. 3 lbs per yard.

$39.00
Qty.

 
1954 Bel Air Convertible Preassembled Door & Rear Side Panels.

 

Front doors & rear 1/4 panels. Made with new waterproof die cut boards surrounded by new Galvanized edge metal bands and nails attached. Heavy saddle stitched horizonal lines on the center section of the door and rear upper panels. Two colors of 1954 vinyls used. Sewn front and rear armrest covers, top piston covers and windlace set. Vinyl covered kick panels. 35 lbs.

New Armrest assemblies and rubber pads. Vinyl armrests covered and attached to the door panels. $1060.00 Please call to order.

$750.00
Qty.

 
1954 Bel Air Armrest Bases.

 

Front armrest bases for both doors consists of ABS plastic contour shaped to duplicate the 1954 armrest base. Easy to install on your metal support panels. 2 lbs.

$65.00
Qty.

 
1954 Bel Air Sedan Armrest Assembly

 

For front and rear door panels on 2 doors and 4 doors. Sold in pairs. Armrest metal support panels with the armrest bases attached. Installs the same way the factory did them, by bending the tabs into the door boards. Ready to cover with vinyl armrest covers. 8 lbs.

$165.00
Qty.

 
1954 Bel Air Armrest Rubber Pads.

 

This is an exact reproduction of armrest rubber pad, even the Black color is correct. Contour shaped and fit excellent on original armrest bases or Ciadella bases. Sold in pairs at this low price of $69.00. 2 lbs.

$69.00
Qty.

 
1954 Bel Air Convertible Front Armrest Covers.

 

Cut and sewn using correct trim vinyl and double needle stitched. Please state if you want front or rear armrest covers. In all the factory colors. These get wrapped and glued around the metal bases and rubber pads.

$69.00
Qty.

 
1954 Bel Air Front Door Panel Boards.

 

Heavy waterproof fiberboard, die cut to duplicate the shape and fit of 1954 Convertible door panel. All window crank, handle holes and stainless trim holes are pre-punched. Sold in pairs. 10 lbs

$49.95
Qty.

 
1954 Chevy Convertible Rear Quarter Cardboards.

 

These are die cut waterproof boards for the rear quarter trim sides on 1954 Convertibles only.  Sold in pairs.

$25.00
Qty.

 
1954 Bel Air Door Panel Edge Metal Bands.

 

Galvanized door edge metal support bands with serrated back edges to hold the trim vinyl tight. Nails included. For front doors and rear quarter panel boards front edges. 4 lbs.

$89.00
Qty.

 
Chevrolet Replacement Door Panel Nails.

 

For all years. These fit between the door panel and the edge metal band, and just need crimping to secure in place. Sold in groups of 10 for $7.50 with Free Shipping.

$7.50
Qty.

 
1954 Bel Air Door Panel Finger Cup.

 

These are stamped metal door panel finger cups for the front door panels, with two screw holes. Sold individually/. 0.5 lb.

$11.95
Qty.

 
1954 Bel Air Door Panel Metal Support Bracket.

 

Sold individually. This L shaped bracket screws to the door frame and the armrest attaches with two screws from the finger cup. .05 lb.

$10.95
Qty.

 
1954 Bel Air Kick Panels.

 

Die cut to fit properly and be exactly like originals. Black panel boards die cut to correct shape and fit. $15.95 pair or we will sell you a pair of vinyl covered kick panels to match the interior trim vinyl. $55.95 pair 2 lbs.

$15.95
Qty.

 
1954 Bel Air Sunvisor Bare Hardware.

 

Sunvisor fiberboard and support rod. This is for the upholstery shop trim man that wants to do his own or the do it your selfer that is handy and can sew. $50.00 pair 4 lbs.

$50.00
Qty.

 
1954 Bel Air Convertible Sunvisors

 

These are an excellent pair of reproduced Sunvisors, Made using new fiberboards and metal support rods, covered with matching interior vinyl.. 5 lbs.
$149.95
Qty.

 
1954 All Models Seat Belts.

 

Seat belts with chrome quick release aircraft buckle. Woven color webbing to match the 1954 interior colors. Sold per pair or 2 people set, 68" long. $50.00 pair, 3 lbs.

$50.00
Qty.

 
1954 Bel Air Convertible Windlace Set.

 

Matching interior vinyl windlace set (4 pieces) made for the 1954 Convertible. Vinyl covered 1/2" round sponge rubber with dash side flaps and easy to install slide in kick panel cord. 3 lbs

$75.00
Qty.

 
1954 Bel Air Windlace End Tips.

 

A pair of black rubber end tips to add to the ends of your rear quarter windlace set. Excellent reproductions of the oiginals. Replace your missing or damaged end tips or add them if your windlace set didn't come with them. 0.5 lb

$6.95
Qty.

 
1954 Chevy Daytona Carpet Yardage.

 

Reproduced low loop, tightly woven nylon carpet material. 54" wide with latex foam underside. Sold 54" x 36" per running yard. 10 lbs per yard.

$75.00
Qty.

 
1954 Bel Air Convertible Daytona Carpet Set.

 

This is the low loop carpet known as Daytona weave. We have it available in all the 1954 colors. Latex foam underside then jute padding added. Completely cut and sewn in the original style with matching interior vinyl binding and heel pad.  20 lbs.

$375.00
Qty.

 
1954 Daytona Carpet Mats.

 

A set of 4 low loop Daytona carpet mats, for the front and rear in many colors. Nibbed non slip backing. 10 lbs.

 

$125.00
Qty.

 
1954 Bel Air Replacement Loop Carpet Set.

 

All carpet sets are cut & sewn the way the factory did them. Matching interior color vinyl binding and matching color heel pad. Jute padded underside. The best replacement high quality carpet set available.  Please let us know when ordering if you car has bucket seats. 20 lbs.

$199.00
Qty.

 
1954 Loop Carpet Mat Set.

 

Replacement tight loop carpet with vinyl edge binding. Non slip nibbed backing. 10 lbs.


 

$85.00
Qty.

 
1954 Bel Air Convertible Top & Pads.

 

Heavy weight GM Pinpoint grain vinyl. Cut from tested and true patterns. Heat sealed side panels, brass zipper rear window. Includes top pads, and front edge round windlace. Available in many colors. Tinted back window available. 20 lbs

$360.00
Qty.

 
1954 Bel Air Convertible Top Boot.

 

Perfect fitting, Ciadella tested vinyl top boot. All matching vinyl edge binding. Supported under the side panels, snaps included. 7 lbs.

$250.00
Qty.

© 2014 by Ciadella Interiors. All rights reserved.

CIADELLA INTERIORS   |   3116 S. 52ND STREET   |   TEMPE, AZ 85282   |   602.454.8388  or  1.800.875.8390   |   sales@ciadellainteriors.com